The Converter Topology with full Bridge Inverter for the Switched Reluctance Motor Drives

단상 풀 브리지 인버터를 이용한 SRM 컨버터 토폴로지

  • 장도현 (호서대학교 전기정보공학부)
  • Published : 2002.08.01

Abstract

In this paper the new converter topology using single-Phase full bridge inverter for the switched reluctance motor drives is proposed. The proposed SRM drives are supplied by the AC pulse voltage source, while the conventional drives are supplied by the DC voltage source. Speed of the SRM is controlled by adjusting the frequency and the multitude of output current of inverter. The SRM using the proposed converter reduces the switching loss and the machine core loss, and has ability to pre-regulate the input voltage. The total number of power switches become fewer than another topology as a number of stator poles becomes more. Power circuit of an inverter is simpler and its volume is smaller because the module device involving several switches is used as an inverter.

Keywords

References

  1. T.J.E. Miller, Switched Reluctance Motors and Their Control. Oxford, England: Oxford Press 1993
  2. 안진우, 스위치드 리럭턴스 전동기, 오성미디어, 2001
  3. 이기철,박종근,임근희, '가변속 스위치드 리럭턴스 모우터의 새로운 콘버터 토폴로지', 대한전기학회 43권 9호, pp.1463-1471,1994년 9월
  4. G.-H. Rim, and et al, ' A choppingless converter for switched reluctance motor with unity power factor and sinusoidal input current,' IEEE-ESC Corf. Rec, 1994, pp.500-507
  5. Iqbal Husain, Sensor elimination and converter topology simplification in switched reluctance motor drives for commercial applications: Ph.D. Dissertation, Dept. of Electrical Eng., Texas A&M University, May, 1993