한국CDE학회논문집 (Korean Journal of Computational Design and Engineering)

  • 제7권2호
  • /
  • Pages.121-130
  • /
  • 2002
  • /
  • 2508-4003(pISSN)
  • /
  • 2508-402X(eISSN)
한국CDE학회 (Society for Computational Design and Engineering)
권호 표지

특징형상 변환을 이용한 B-rep모델의 다중해상도 구현

Multi-resolutional Representation of B-rep Model Using Feature Conversion

  • 발행 : 2002.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The concept of Level Of Detail (LOD) was introduced and has been used to enhance display performance and to carry out certain engineering analysis effectively. We would like to use an adequate complexity level for each geometric model depending on specific engineering needs and purposes. Solid modeling systems are widely used in industry, and are applied to advanced applications such as virtual assembly. In addition, as the demand to share these engineering tasks through networks is emerging, the problem of building a solid model of an appropriate resolution to a given application becomes a matter of great necessity. However, current researches are mostly focused on triangular mesh models and various operators to reduce the number of triangles. So we are working on the multi-resolution of the solid model itself, rather than that of the triangular mesh model. In this paper, we propose multi-resolution representation of B-rep model by reordering and converting design features into an enclosing volume and subtractive features.

키워드

참고문헌

  1. Principles of CAD/CAM/CAE Systems Lee, K. W.
  2. Proceedings of ACM SIGGRAPH '93 Mesh optimization Hoppe, H.;DeRose, T.;Duchamp, T.;McDonald, J.;Stuetzle W.
  3. Proceedings of ACM SIGGRAPH '96 Progressive Meshes Hoppe, H.
  4. Proceedings of ACM SIGGRAPH '97 View-dependent Refinement of Progressive Meshes Hoppe, H.
  5. Doctoral Thesis Octree-based Simplification of Polyhedral Solids Carlos And$\'{u}$jar Gran
  6. Computer-Aided Design v.24 no.9 Recognition of Form Features Using Convex Decomposition Kim, Y. S. https://doi.org/10.1016/0010-4485(92)90027-8
  7. Computer-Aided Design v.30 no.13 A Feature-based Approach to Extracting Maching Features Lee, J. Y.;Kim, K. https://doi.org/10.1016/S0010-4485(98)00055-4
  8. Computer-Aided Design v.32 no.5-6 Morphological Analysis for Product Design Belaziz, M.;Bouras, A.;Burn, J. M. https://doi.org/10.1016/S0010-4485(00)00019-1
  9. Geometric Modeling for CAD Applications A Taxonomy of Features for Solid Modelling Wilson, P. R.;Pratt, M. J.;M. J. Wozny(ed.);H. W. McLaughlin(ed.);J.L. Encarnacao(ed.)
  10. An Introduction to Solid Modeling Mantyla, M.
  11. Solid Modeling '95 Multiple-way Feature Conversion to Support Concurrent Engineering Kraker, K. J.;Dohmen, M.;Bronsvoort, W. F.
  12. Solid Modeling '97 Maintaining Multiple View in Feature Modeling Kraker, K. J.;Dohmen, M.;Bronsvoort, W. F.
  13. Solid Modeling '97 Interactive Feature Extraction for a Form Feature Conversion System Suh, Y. S.;Wozny, M. J.
  14. Computers in Industry v.21 Feature Modeling and Conversion: Key Concepts to Concurrent Engineering Bronsvoort, W. F.;Jansen, F. W.
  15. Computer-Aided Design v.26 no.9 Recognizing Multiple Interpretation of Interacting Machine Features Tseng, Y.;Joshi, S. B. https://doi.org/10.1016/0010-4485(94)90018-3