Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Finite Element Analysis of Deformation Behavior due to Material Properties during Equal Channel Angular Pressing

등통로각압축(ECAP) 공정에서 재료의 물성에 따른 변형 거동의 유한요소해석

  • Bae, Gang-Ho (Dept.of Mechanical Engineering, Graduate School of Korea University) ;
  • Kwon, Gi-Hwan (Dept.of Mechanical Engineering, Graduate School of Korea University) ;
  • Chae, Soo-Won (Dept.of Mechanical Engineering, Korea University) ;
  • Kwon, Sook-In (Dept. of Met.Eng.Korea University) ;
  • Kim, Myung-Ho (Dept.of Metallurgical Engineering, Inha University) ;
  • Hwang, Sun-Keun (Dept.of Metallurgical Engineering, Inha University)
  • 배강호 (고려대학교 대학원 기계공학과) ;
  • 권기환 (고려대학교 대학원 기계공학과) ;
  • 채수원 (고려대학교 기계공학과) ;
  • 권숙인 (고려대학교 금속공학과) ;
  • 김명호 (인하대학교 금속공학과) ;
  • 황선근 (인하대학교 금속공학과)
  • Published : 2002.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Much research efforts have been made on the equal channel angular pressing (ECAP) which produces ultra-fine grains. Among many process parameters such as channel angles, frictions, die deformations and materials employed, the effects of material properties on the deformation behavior have been investigated. The finite element method has been used to investigate this issue.

Keywords

References

  1. V.M. Segal, V.I. Rezenikov, A.E. Drobyshevskiy, V.I. Kopylov, 'Plastic Working of Metals by Simple Shear,' Metally(Eng. Trans. : Russian Metallurgy) Vol.1, pp. 99-105, 1981
  2. Kiyotaka Nakashima, Zenji Horita, Minoru NeMoto and Terence G. Langdon, 'Influence of Channel Angle on the Development of Ultrafine Grains in Equal-Channel Angular Pressing,' Acta mater. Vol. 46, No. 5, pp. 1589-1599, 1998 https://doi.org/10.1016/S1359-6454(97)00355-8
  3. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto M. and T.G. Langdon, 'Principle of Equal-Channel Angular Pressing for the Processing of Ultra-Fine Grained Metals,' Scripta Mater., Vol. 35, No. 2, pp. 143-146, 1996 https://doi.org/10.1016/1359-6462(96)00107-8
  4. Y. Wu, I. Baker, 'An Experimental Study of Equal Channel Angular Extrusion,' Scripta Mater. Vol. 37, No. 4, pp. 437-442, 1997 https://doi.org/10.1016/S1359-6462(97)00132-2
  5. P.B. Prangnell, C. Harris and S.M. Roberts, 'Finite Element Modelling of Equal Channel Angular Extrusion,' Scripta Mater., Vol. 37, No. 7, pp. 983-989, 1997 https://doi.org/10.1016/S1359-6462(97)00192-9
  6. J.R. Bowen, A. Gholinia, S. M. Roberts, P.B. Prangnell, 'Analysis of the Billet Deformation Behavior in Equal Channel Angular Extrusion,' Mater. Sci. & Eng., Vol(A) 287, pp. 87-99, 2000 https://doi.org/10.1016/S0921-5093(00)00834-0
  7. 서민홍, 김형섭, 홍순익, '등통로각압축(ECAP)공정의 유한요소해석,' 대한금속 재료 학회지, 제38권, 제1호, pp. 136-140, 2000
  8. 권기환, 채수원, 권숙인, 김명호, 황선근, 'Pure-Zr 의 ECAP 공정에서 마찰이 재료의 변형거동과 금형에 미치는 영향,' 한국정밀공학회지, 제 38 권, 제 1 호, pp. 136-140, 2000
  9. 권기환, 채수원, 권숙인, 김명호, 황선근, '순수 지르코늄의 ECAP 공정에서 금형의 변형 및 채널각이 재료의 변형거동에 미치는 영향,' 대한기계학회 논문집 A, 제 25 권, 제 11 호, pp. 1751-1758, 2001
  10. H.S.Kim, M.H.Seo, S.I.Hong, 'On the die corner gap formation in equal channel angular pressing,' Master. Sci. Eng. A291, pp. 86-90, 2000 https://doi.org/10.1016/S0921-5093(00)00970-9
  11. ABAQUS Standard User's Manual for version 5.8, Hibbitt, Karlsson & Sorensen, Inc., Pawtucket
  12. Stephen H. Crandall, Norman C. Dahl, Thomas J. Lardner, 'An introduction to the mechanics of solid,' Second edition, pp. 327