한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제19권8호
  • /
  • Pages.126-133
  • /
  • 2002
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

초정밀 절삭에 있어서 임계절삭깊이에 대한 연구

A Study on the Critical Depth of Cut in Ultra-precision Machining

  • 김국원 (순천향대학교 기계공학과)
  • 발행 : 2002.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The cutting thickness of ultra-precision machining is generally very small, only a few micrometer or even down to the order of a few nanometer. In such case, a basic understanding of the mechanism on the micro-machining process is is necessary to produce a high quality surface. When machining at very small depths of cut, metal flow near a rounded tool edge become important. In this paper a finite element analysis is presented to calculate the stagnation point on the tool edge or critical depth of cut below which no cutting occurs. From the simulation, the effects of the cutting speed on the critical depths of cut were calculated and discussed. Also the transition of the stagnation point according to the increase of the depths of cut was observed.

키워드

참고문헌

  1. Nakayama, K., and Tamura, K., 'Size Effect in Metal-Cutting Force,' J. Eng. Ind., Trans. ASME, pp. 119-126, 1968
  2. Moriwaki, T., and Okuda, K., 'Machinability of Copper in Ultra Precision Micro Diamond Cutting,' Annals of the CIRP, Vol. 38, pp. 115-118, 1989 https://doi.org/10.1016/S0007-8506(07)62664-X
  3. Furukawa, Y., and Moronuki, N., 'Effect of Material Properities on Ultra Precision Cutting Precesses,' Annals of the CIRP, Vol. 37, No. 1, pp. 113-116, 1988 https://doi.org/10.1016/S0007-8506(07)61598-4
  4. Lucca, D.A., Rhorer, R.L. and Komanduri, R., 'Energy Dissipation in the Ultraprecision Machining of Copper,' Annals of the CIRP, Vol. 40, pp. 69-72, 1991 https://doi.org/10.1016/S0007-8506(07)61936-2
  5. Lucca, D.A., Seo, Y.W., 'Effect of Tool Edge Geometry on Energy Dissipation un Ultraprecision Machining,' Annals of the CIRP, Vol. 42, pp. 83-86, 1993 https://doi.org/10.1016/S0007-8506(07)62397-X
  6. Basuray, P.K., Misra, B. K. and Lal, G. K., 'Transition from Ploughing to Cutting During Machining with Blunt Tools,' Wear, Vol. 43, pp. 341-349, 1977 https://doi.org/10.1016/0043-1648(77)90130-2
  7. Yuan, Z.J., Zhou, M. and Dong, S., 'Effect of Diamond Tool Sharpness on Minimum Cutting Thickness and Cutting Surface Integrity in Ultraprecision Machining,' Journal of Materials Processing Technology, Vol. 62, pp. 327-330, 1996 https://doi.org/10.1016/S0924-0136(96)02429-6
  8. Iwata, K., Osakada, K., and Terasaka,Y., 'Process Modeling of Orthogonal Cutting by the Rigid-Plastic Finite Element Method,' ASME J. Eng. Matl. and Tech., Vol. 106, pp. 132-138, 1984 https://doi.org/10.1115/1.3225687
  9. Moriwaki, T., Sugimura, N. and Luan, S., 'Combined Stress, Material Flow and Heat Analysis of Orthogonal Micromachining of Copper,' Annals of the C.I.R.P., Vol. 42, pp. 75-78, 1993 https://doi.org/10.1016/S0007-8506(07)62395-6
  10. Kim, K.W., and Sin, H.-C., 'Development of a thermo-viscoplastic cutting model using finite element method,' Int. J. Mach. Tools Manufact. Vol. 36, pp. 379-397, 1996 https://doi.org/10.1016/0890-6955(95)00054-2
  11. Kim, K.W., Lee, W.Y., and Sin, H.-C., 'A Finite Element Analysis of Machining with the Tool edge Considered,' Journal of Materials Processing Technology, Vol. 86, No. 1-3, pp. 45-55, 1999 https://doi.org/10.1016/S0924-0136(98)00230-1
  12. Kim, K.W., Lee, W.Y., and Sin, H.-C., 'A Finite Element Analysis for the Characteristics of Temperature and Stress in Micro-Machining considering the Size Effects,' International Journal of Machine Tools & Manufacture, Vol. 39, No. 9, pp. 1507-1524, 1999 https://doi.org/10.1016/S0890-6955(98)00071-6
  13. Oxley, P.L.B., Mechanics of machining:an analytical approach to assessing machinability, Ellis Horwood, Chichester, 1989