DOI QR코드

DOI QR Code

Measurements of Heat (Mass) Transfer Coefficient on the Surface of a Turbine Blade with n High Turning Angle Using Naphthalene Sublimation Technique

큰 회전각을 가지는 터빈 블레이드 표면에서 나프탈렌승화법을 이용한 열(물질)전달계수 측정

  • Published : 2002.08.01

Abstract

The heat (mass) transfer characteristics on the blade surface of a high-turning first-stage turbine rotor for power generation has been investigated by employing the naphthalene sublimation technique. A four-axis profile measurement system is developed successfully for the measurements of local sublimation depth on the curved surface In the leading edge region, there is a good agreement between the present heat (mass) transfer data and the previous result on a turbine blade with a moderate turning angle, but some discrepancies are found in the mid-chord heat (mass) transfer between the two results. The local heat (mass) transfer on the present suction surface is greatly enhanced due to an earlier boundary transition, compared with that on a turbine blade with a moderate turning angle, meanwhile there is only a slight change in the pressure-side heat (mass) transfer between the two different turbine rotors. In general, the heat (mass) transfer augmentation by the endwall vortices is found much higher on the suction surface than on the pressure surface.

Keywords

References

  1. Bayley, F. J., and Priddy, W. J., 1981, 'Effects of Free-Stream Turbulence Intensity and Frequency on Heat Transfer to Turbine Blading,' ASME Journal of Engineering for Power, Vol. 103, pp.60-64 https://doi.org/10.1115/1.3230709
  2. Chen, P. H., and Goldstein, R. J., 1992, 'Convective Transport Phenomena on the Suction Surface of a Turbine Blade Including the Influence of Secondary Flows Near the Endwall,' ASME Journal of Turbomachinery, Vol. 114, pp.776-787 https://doi.org/10.1115/1.2928031
  3. Goldstein, R. J., Wang, H. P., and Jabbari, M. Y., 1995, 'The Influence of Secondary Flows Near the Endwall and Boundary Layer Disturbance on Convective Transport From a Turbine Blade,' ASME Journal of Turbomachinery, Vol. 117, pp.657-665 https://doi.org/10.1115/1.2836585
  4. Wang, H. P., Goldstein, R. J., and Olson, S. J., 1999, 'Effect of High Free-Stream Turbulence With Large Length Scale on Bade Heat/Mass Transfer,' ASME Journal of Turbomachinery, Vol. 121, pp.217-224 https://doi.org/10.1115/1.2841304
  5. 이상우, 전상배, 박병규, 2001, '나프탈렌승화법을 이용한 터빈 익열 끝벽에서의 열(물질)전달계수 측정', 대한기계학회논문집, 제25권, 제3호, pp.356-365
  6. Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp.416-434 https://doi.org/10.1016/0894-1777(94)00071-F
  7. Ambrose, D., Lawrenson, I. J. and Sprake, C. H. S., 1975, 'The Vapour Pressure of Naphthalene,' J. Chem. Thermodynamics, Vol. 7, pp.1173-1176 https://doi.org/10.1016/0021-9614(75)90038-5
  8. Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985, 'ASME Measurement Uncertainty,' ASME Journal of Fluids Engineering, Vol. 107, pp.161-164 https://doi.org/10.1115/1.3242450
  9. Wang, H. P., Olson, S. J., Goldstein, R. J. and Eckert, E. R. G., 1997, 'Flow Visualization in a Linear Turbine Cascade of High Performance Turbine Blade,' ASME Journal of Turbomachinery, Vol. 119, pp.1-8 https://doi.org/10.1115/1.2841006