References
- Shinichi, S., Eiichi, K. and Tatehito, D., 1996, 'Improvement of Thermal Efficiency by Offsetting the Crankshaft Center to the Cylinder Bore Center,' JSAE Paper 9638770
- Nakayama, K., Tamaki, S., Miki, H. and Takiguchi, M., 2000, 'The Effect of Crankshaft Offset on Piston Friction Force in a Gasoline Engine,' SAE paper 200002-0922
- Zhu, D., Cheng, H. S., Arai, T. and Hamai, K., 1992, 'A Numerical Analysis for Piston Skirts in Mixed Lubrication-Part I: Basic Modeling,' ASME Trans. Journal of Tribology, Vol. 114, pp. 553-562 https://doi.org/10.1115/1.2920917
- Han, D. C., Kim, J. Y., Cho, M. R. and Lee, J. S., 2000, 'A Study on the Dynamic and Mixed Lubrication Analysis of Piston Skirt,' Proc. International Tribology Conference 2000, Nagasaki
- Cho, M. R., Han, D. C. and Choi, J. K., 1999, 'Oil Film Thickness in Engine Connecting-Rod Bearing with Consideration of Thermal Effects: Comparison between Theory and Experiment,' ASME Trans. Journal of Tribology, Vol. 121, pp. 901-907 https://doi.org/10.1115/1.2834153
- Cho, M. R., Shin, H. J. and Han, D. C., 2000, 'A study on the Circumferential Groove Effects on the Minimum Oil Film Thickness in Engine Bearings,' KSME International Journal, Vol. 14, No.7, pp.737-743
- Rohde, S. M., 1980, 'A Mixed Friction Model For Dynamically Loaded Contacts with Application to Piston Ring Lubrication,' Proc. the 7th Leeds-Lyon Symposium on Tribology, Butterworths, pp. 262-278
- Patir, N. and Cheng, H. S., 1978, 'An Average Flow Model for Determining Effects of Three Dimensional Roughness on Partial Hydrodynamic Lubrication,' ASME Trans. Journal of Lubrication Technology, Vol. 100, No. 1, pp. 12-17 https://doi.org/10.1115/1.3453103
- Patir, N. and Cheng, H. S., 1979, 'Application of Average Flow Model to Lubrication Between Rough Sliding Surface,' ASME Trans. Journal of Lubrication Technology, Vol. 121, No.2, pp. 220-230
- Greenwood, J. A. and Tripp, J. H., 1971, 'The Contact of Two Nominally Flat Rough Surface,' Proc. Instn. Mech. Engrs., 185,48/71