Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Planning of Part Feeder and Design of a Data Base for Part Feeder Planning System

자동 부품 정렬기 응용계획과 전용 DB 설계

  • Guk, Geum-Hwan (Dept.of Control and Instrumentation Engineering, Gyeongsang National University) ;
  • Park, Yong-Taek (Dept. of Control and Instrumentation Engineering, Graduate School of Gyeongsang National University)
  • 국금환 (경상대학교 제어계측공학과, 생산기술연구소) ;
  • 박용택 (경상대학교 대학원 제어계측공학과)
  • Published : 2002.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

The planning of part feeder and other manufacturing automation equipments is almost always underestimated. Planning ahead for those crucial pitfalls can permit steps to take to minimize heir impacts, especially if the problems can be discovered in the planning phase, not on the shop floor. Planning process is an engineering process, namely a series of trade-offs. The effective trade-offs in the shortest amount of time can be possible with the help of a computer-aided ngineering (CAE) technique. The main parts of CAE fur part feeder are database system of fabricated workpiece parts, part feeders, part feeder components. In this study, a planning process of part feeder is presented. Especially, a systematic analysis of workpiece parts and part feeders is performed for the design of databases of CAE system.

Keywords

References

  1. S. Rusaw, K. Gupta, S. Payandeh, 'Part Orienting with a Force/Torque Sensor,' Proceedings of the 1999 IEEE International Conference on Robotics245 & Automation, pp. 2545-2550, 1999 https://doi.org/10.1109/ROBOT.1999.773980
  2. 이형근, 이문규, '머신비젼 기반의 엔진마운트 부품 자동공급시스템,' 한국정밀공학회지, 제18권, 제5호, pp. 177-185, 2001
  3. J. Wiegley, K. Goldberg, M. Peshkin, M. Brokowski, 'A Complete Algorithm for Designing Passive Fences to Orient Parts,' Proceedings of the 1996 IEEE International Conference on Robotics & Automation, pp. 1133-1139, 1996 https://doi.org/10.1109/ROBOT.1996.506860
  4. R.P. Berretty, K. Goldberg, L. Cheung, M.K. Overmars, G. Smith, A. F. van der Stappen, 'Trap Design for Vibratory Bowl Feeders,' Proceedings of the 1999 IEEE International Conference on Robotics & Automation, pp. 2558-2563, 1999 https://doi.org/10.1109/ROBOT.1999.773982
  5. 국금환, 박준모, '로봇 셀 설계절차와 작업 지원 도구,' 대한기계학회논문집 A권, 제24권, 제6호, pp. 1379-1389, 2000
  6. A.D. Christiansen, A.D. Edwards, C.A. Coello, 'Automated Design of Part Feeders using a Genetics Algorithm,' Proceedings of the 1996 IEEE International Conference on Robotics & Automation, pp. 846-851, 1996 https://doi.org/10.1109/ROBOT.1996.503878
  7. D.R. Berkowitz, J. Canny, 'Designing Parts Feeders Using Dynamic Simulation,' Proceedings of the 1996 IEEE International Conference on Robotics & Automation, pp. 1127-1132, 1996 https://doi.org/10.1109/ROBOT.1996.506859
  8. G.C. Causey, R.D. Quinn, 'Testing and Analysis of a Flexible Feeding System,' Proceedings of the 1999 IEEE International Conference on Robotics & Automation, pp. 2564-2571, 1999 https://doi.org/10.1109/ROBOT.1999.773983
  9. W. Meyer, R. Schanz, 'Planung flexibler Ordnungssysteme: Glundlagen, Beispiele, Zukunftsaussichten,' IFF Stuttgart, 1985
  10. 한국기계연구소, '조립 자동화 시스템 개발(I),' 과학기술처, 1991