References
- AWS D1.1 Structural Welding Code-Steel
- 容接工學 K. Satoh (et al)
- Finite Element Procedures K. J. Bathe
- The Finite Element Method, Fifth Edition O. C. Zienkiewicz;R. L. Taylor
- Transactions of the Japanese Welding Society v.6 no.1 Applicability of Substituting Plane-Deformation Problems for Three-Dimensional Thermal Elasto-Plastic Problem Y. Ueda (et al) https://doi.org/10.2207/qjjws.6.47
- Transactions of JWRI v.24 no.2 FEM Analysis of 3D Welding Residual Stresses on Significance of Defects in Various Types of Welded joint N. X. Ma (et al)
- Welding Journal v.20 no.5 Mathematical Theory of Heat Distribution during Welding and Cutting D. Rosenthal
- Metallurgical Transactions B v.15B New Finite Element Model for Welding Heat Source J. Goldak (et al)
- Derivation of Diffusion Equations From Boltzman-TypeTransport Equation Acta Metallurgica v.31 no.10 A General Mathematical Description of Hydrogen Diffusion in Steels-1 J. B. Leblond;D. Dubois
- Proc. of Int. Conf . on Thermal Process Modeling and Computer Simulation v.E-5 no.1 Numerical Study of the Plastic Behavior of a Low Alloy Steel during Phase Transformation J. Devaux (et al)
- A New Comprehensivw Thermal Solution Procedure For Multiple Pass and Curved Welds v.410 no.1 Z. Cao (et al)
- Assessment Methodology for Preventing Failure;Deterministic and Probabilistic Aspects and Weld Residual Stress v.1 Z. Cao (et al)
- SYSWELD/Manual, version 2000
- International Journal of Pressure Vessels and Piping v.78 Analysis of Residual Stresses and Distortions in T-joint Fillet Welds Tso-Liang Teng (et al) https://doi.org/10.1016/S0308-0161(01)00074-6
- Journal of the Society of Naval Architects of Japan v.189 A Practical Estimation Method of the Skin Plate Distortion Derived from Fillet Weld K. Gotoh.;T. Toyosada.;S. Takechi.
- ABAQUS/Theory Manual, version 5.7
- Welding Journal v.77 no.12 A Study on Transverse Weld Cracks in Thick Steel Plate with the FCAW Process H. W. Lee (et al)
- Journal of Applied v.35 A Path-independent. Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks, ASME J. R. Rice
- Journal of KWS v.19 no.6 Residual Stress and Fracture Analysis of Think Plate for Partial Penetration Multi-pass Weldment S. Kim (et al)
- Engineering Fracture Mechanics v.65 Comparison of the Stress Intensity Factor of T and Cruciform Welded Joints with Different Main and Attachment Plate Thickness A. Khodadad Motarjemi (et al) https://doi.org/10.1016/S0013-7944(99)00106-X
- Comp. Meth. Appl. Mech. Engng v.115 Damage 90 - A Post Processor for Crack Initiation J. Lemaitre;I Doghri https://doi.org/10.1016/0045-7825(94)90060-4
- Computational Mechanics v.20 One Damage Law for Different Mechanism J. Lemaitre;J. P. Sermage https://doi.org/10.1007/s004660050221
- Journal of Applied Mechanics v.55 Continuum Damage Mechanics(Part 1&2), ASME J. L. Chaboche https://doi.org/10.1115/1.3173661
- International Journal of Solids & Structures v.23 Strain and Stress Based Continuum Damage Model J. C. Simo;J. W. Ju https://doi.org/10.1016/0020-7683(87)90083-7
- International Journal of Damage Mechanices v.1 no.1 Thermal Elasto-Viscoplastic Damage Behavior of Structureal Members in Hot-Dip Galvanization Y. Toi;J. M. Lee
- Modeling of Material Damage and Failure of Structures - Theory and Applications J. J. Skrzypek;A. Ganczarski