Status quo Analysis on the Wearing Practice of Household Rubber Gloves for Quality Improvement

가정용 고무장갑의 품질개선을 위한 사용실태 분석

  • 전은경 (울산대학교 생활과학부 의류학 전공) ;
  • 유화숙 (연세대학교 의류과학연구소 전문연구원) ;
  • 임지영 (동명정보대학교 정보조형학부 패션디자인학과)
  • Published : 2002.04.01

Abstract

This study was conducted to analyze the wearing practice and the purchasing characteristics of household rubber gloves in order to obtain the product demands for quality improvement. The effects of wearing time per day and demographic characteristics on those were evaluated. A questionnaire was developed and administered to 494 housewives. Statistical tests such as descriptive analysis, crosstabs, factor analysis, one-way ANOVA, were used to analyze the data. The results indicated that housewives were largely divided into two groups according to the wearing time per day. One group wore gloves more than 3 hours a day, while the other wore less than 3 hours. We found that there were significant differences in the wearing practice and the purchasing characteristics between these two groups. It showed that the quality improvement of household rubber gloves should be achieved in a point of view of the comfort feeling and easiness in wearing and taking off. The housewives showed positive attitude toward pliability and necessity, while negative altitude toward dryness, comfort and mobility in wearing. The household rubber gloves were identified as the necessities which is so familiar and common that only a few of demographic characteristics have effect on.

Keywords

References

  1. 김완묵(2001. 9. 14). ‘주부 가사 노동 총가치 72조원’. 통계청 조사 매일경제신문
  2. 노재훈(1988). 손 및 팔 보호구. 산업보건, 10, 19-21
  3. 변승남, 이동훈(1997). 신호봉 손잡이의 최적 굵기 결정에 관한 연구. 대한인간공학회지, 16(1), 15-27
  4. 윤길주(1999. 4. 30). ‘주부 기사노동 ‘세탁’ 가장 힘들어‘. 경향신문
  5. 은희철(2001). 직업성 피부질환. http://www.healthlink.co.kr
  6. 이연순, 김경아(1999). 청정실용 방진장갑의 온열 쾌적성에 관한 연구. 한국생활환경학회지, 6(2), 17-23
  7. 이예령(1997). 수술실 간호사에서 외과적 장갑착용에 의한 자극성피부염 및 알레르기의 발생현황에 대한 연구. 연세대학교 교육대학원 석사 학위논문
  8. 장현규(1995). Latex allergy의 빈도 및 단백질 성상분석. 알레르기, 15(4), 623-631
  9. Batra, S., Bronkema, L. A., Wang, M. J. and Bishu, R. R. (1994). Glove Attributes: Can They Predict Performance? International Journal of Industrial Ergonomics, 14, 201-209 https://doi.org/10.1016/0169-8141(94)90096-5
  10. Bensel, C. K. (1993). The effects of various thickness of chemical protective gloves on manual dexterity. Ergonomics, 36(6), 687-696 https://doi.org/10.1080/00140139308967930
  11. Branson, D. H. , Abusamra, L. , Hoener, C. and Rice, S. (1988). Effect of Glove liners on Sweat Rate, Comfort and Psychomotor Task Performance. Textile Research Journal, 58(3), 166-173 https://doi.org/10.1177/004051758805800307
  12. Cochran, D.J. and Riley, M. (1986). The Effects of Handle Shape and Size on Exerted Forces. Human Factors, 28(3), 253-265 https://doi.org/10.1177/001872088602800302
  13. Creely, K. S. and Cherrie, J. W. (2001). A Novel Method of Assessing the Effectiveness of Protective Gloves-Results from a Pilot Study. Ann. Occup. Hyg, 45(2), 137-143
  14. Mital, A, Kuo, Y. and Faard, H. F. (1994). A Quantitative Evaluation of Gloves Used with Non-Powered Hand Tools in Routine Maintenance Tasks. Ergonomics, 37(2), 333-343 https://doi.org/10.1080/00140139408963650
  15. Muralidhar, A, Bishu, R. R. and Hallbeck, M. S. (1999). The Development and Evaluation of an Ergonomic Glove. Applied Ergonomics, 30, 555-563 https://doi.org/10.1016/S0003-6870(99)00005-8
  16. Nelson, J. B. and Mital, A (1995). An Ergonomic Evaluation of Dexterity and Tactility with Increase in Examination/Surgical Glove Thickness. Ergonomics, 38(4), 723-733 https://doi.org/10.1080/00140139508925144
  17. Rosenbald W. E. (1987). An Anthropometric Study as the Basis for Sizing Anatomically Designed Mittens. Applied Ergonomics, 18(4)
  18. Shih, Y. C. and Wang, M. J. J. (1996). The Effects of Weight Levels and Gloves on the Ability to Discriminate Weight Difference. Ergonomics, 39(5), 729-739 https://doi.org/10.1080/00140139608964494
  19. Torrens, G. E. & Newman, A. (2000). The Evaluation of Gloved and Ungloved Hands. Contemporary Ergonomics, 301-305
  20. Wallin, E. R. (1985). User-Oriented Product Development Applied to Functional Clothing Design'. Applied Ergonomics, 16(4),279-287 https://doi.org/10.1016/0003-6870(85)90092-4
  21. Wang, J.J., Liu, C. M. and Shin, Y. C. (1991). A Method for Determining the Difference Threshold of Judging Weight Difference in Material Handling. International Journal of Industrial Ergonomics, 8, 335-343 https://doi.org/10.1016/0169-8141(91)90069-X
  22. Watkins, S. M. (1995). Clothing: The Portable Environment. Iowa State University Press
  23. Yassin, M.S. (1994). Latex Allergy in Hospital Employees. Ann. Allergy, 69, 207-211