Journal of Mechanical Science and Technology

  • 제16권4호
  • /
  • Pages.501-511
  • /
  • 2002
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

An Approximate Model for Predicting Roll Force in Rod Rolling

  • Lee, Youngseog (Plate, Rod & Welding Group and Steel Products & Process Group at Technical Research Laboratories, Pohang Iron and Steel Corp.(POSCO)) ;
  • Kim, Hong-Joon (Plate, Rod & Welding Group and Steel Products & Process Group at Technical Research Laboratories, Pohang Iron and Steel Corp.(POSCO))
  • 발행 : 2002.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a study of the effect of rolling temperature, roll gap (pass height), initial specimen size and steel grades of specimens on the roll force in round-oval-round pass sequence by applying approximate method and verifications through single stand pilot rod rolling tests. The results show that the predicted roll forces are in good agreement with the experimentally measured ones. The approximate model is independent of the change of roll gap, specimen size and temperature. Thus, the generality of the prediction methodology employed in the approximate model is proven. This study also demonstrates that Shida's constitutive equation employed in the approximate model needs to be corrected somehow to be applicable for the medium and high carbon steels in a lower temperature interval (700∼900$\^{C}$).

키워드

참고문헌

  1. Kalpakjian, S., 1992, 'Manufacturing Processes for Engineering Materials-2nd ed.,' Addison Wesley Publishing Company, pp. 171-175
  2. Kim, H. J., Kim, T. H. and Hwang, S. M., 2000, 'A New Free Surface Scheme for Analysis of Plastic Deformation in Shape Rolling,' J. Mater. Proc. Tech., Vol. 24, pp. 81-93 https://doi.org/10.1016/S0924-0136(00)00519-7
  3. Kim, N., Lee, S. M., Shin, W. and Shivpuri, R., 1990, 'Simulation of Square-to-Oval Single Pass Rolling Using a Computationally Effective Finite and Slab Element Method,' J. Eng. Ind., Vol. 114, pp. 329-335
  4. Komori, K., 1997, 'Simulation of Deformation and Temperature in Multi-Pass Caliber Rolling,' J. Mater. Proc. Tech., Vol. 71, pp. 329-336 https://doi.org/10.1016/S0924-0136(97)00094-0
  5. Lee, Y., 2001, 'An Analytic Study of Mean Roll Radius in Rod Rolling,' ISIJ Int., Vol. 41, pp. 1416-1418
  6. Lee, Y. amd Kim, B. M., 2001, 'Prediction of the Surface Profile of Exit Cross Section in Round-Oval-Round Pass Rolling Sequence,' Accepted for Publication in KSME International
  7. Lee, Y., Choi, S. and Kim, Y. H., 2000, 'Mathematical Model and Experimental Validation of Surface Profile of a Workpiece in Round-Oval-Round Pass Sequence,' J. Mater. Proc. Tech., Vol. 81, pp. 87-96 https://doi.org/10.1016/S0924-0136(00)00734-2
  8. Lee, Y., Kim, H. J. and Hwang, S. M., 2001, 'Analytic Model for the Prediction of Mean Effective Strain in Rod Rolling Process,' J. Mater. Proc. Tech., Vol. 114, pp. 129-138 https://doi.org/10.1016/S0924-0136(01)00563-5
  9. Lee, Y. and Kim, Y. H., 2001, 'Approximate Analysis of Roll Force in Round-Oval-Round Pass Rolling Sequence,' J. Mater. Proc. Tech., Vol. 113, pp. 124-130 https://doi.org/10.1016/S0924-0136(01)00712-9
  10. Lenard, J. G., Pietrzyk, M. and Cser, L., 1999, 'Mathematical and Physical Simulation of the Properties of Hot Rolled Products,' Elsevier Science Ltd., Netherlands, pp. 73-75
  11. Park, J. J. and Oh, S. I., 1990, 'Application of Three Dimensional Finite Element Analysis to Shape Rolling Process,' J. Eng. Ind., Vol. 112, pp. 36-46 https://doi.org/10.1115/1.2899293
  12. Roberts, W. L., 1983, Hot Rolling of Steel, Marcel Dekker Inc, New York, pp. 687-689
  13. Said, A., Lenard, J. G., Ragab, A. R. and Elkhier, M. A., 1999, 'The Temperature, Roll Force and Roll Torque During Hot Bar Rolling,' J. Mater. Proc. Tech., Vol. 88, pp. 147-153 https://doi.org/10.1016/S0924-0136(98)00391-4
  14. Shida, S., 1969, 'Empirical Formula of Flow Stress of Carbon Steels-Resistance to Deformation of Carbon Steels at Elevated Temperature,' 2nd Report (in Japanese), J. JSTP, Vol. 10, pp. 610-617
  15. Shinokura, T. and Takai, K., 1986, 'Mathematical Models of Roll Force and Torque in Steel Bar Rolling,' (in Japanese), ISIJ Int., Vol. 72, pp. 58-64
  16. Shin, W., Lee, S. M., Shivpuri, R. and Altan, T., 1992, 'Finite-Slab Element inverstigation of Square-to-Round Multi-Pass Shape Rolling,' J. Mater. Proc. Tech., Vol. 33, pp. 141-154 https://doi.org/10.1016/0924-0136(92)90316-K
  17. Song, G. H., Kim, S. I. and Park, H. D., 1996, 'A Study of Improvement of Prediction Accuracy for Rolling Force in Continuous Rolling Mill,' Trans. KSME (in Korean), Vol. 20, pp. 2257-2265
  18. Wusatowski, Z., 1969, Fundamentals of Rolling, Pergamon Press, London, pp. 107-109