초록
우리나라 해양수산부(1999) $\ulcorner$항만 및 어항설계기준$\lrcorner$ 에서는 중력식 방파제 또는 중력식 안벽의 기초의 지지력 검토시 Bishop방법을 이용하여 기초의 지지력을 계산하는 것을 표준으로 규정하구 이 때 사석의 강도정수는 대형삼축압축시험을 이용하여 정하는 것이 가장 합리적이나 여러가지 여건상 시험이 불가능할 경우에는 일본 항만기술연구소의 $\ulcorner$항만기연자료 No. 699(水上, 1991)$\lrcorner$를 인용하여 암석의 일축압축강도가 300 kg/$cm^2$이상이면 점착력 0.2kg/$cm^2$, 내부마찰각 $35^{\circ}$$^{\circ}$는 기대할 수 있다는 결과를 인용.제시하고 있다. 그러나 이에 대한 국내의 어떠한 검증도 이루어지지 않았다. 본 연구에서는 비교적 일축압축강도가 작은 북제주 다공질 현무암 사석재를 대상으로 국내최초로 대형삼축압축시험(공시체직경: 30cm, 공시체높이: 60cm)을 실시하였다. 시험결과 북제주 현무암 사석재의 일축압축 강도가 400 kg/$cm^2$보다 클 경우 c=0.3kg/$cm^2,\phi=36^{\circ}$ 의 강도정수를 사용할 수 있음을 제안하고, 입자파쇄와 다이러턴시로 대표되는 사석재의 전단 특성에 대해서도 고찰하였다.
According to the Korean Design Code for port and harbor facilities, bearing capacity of rubble mound under eccentric and inclined load is calculated by the simplified Bishop method, and strength parameters are recommended to be c=0.2kg/$cm^2$ and \phi=35^P\circ}$ fur standard rubble if the compressive strength of parent rock is greater than 300kg/$cm^2$, according to research results by Junichi Mizukami(1991). But this facts have never been verified in Korea because there was no large-scale triaxial test apparatus until 2000 in Korea. For the first time in Korea, the large-scale triaxial test(sample diameter 30cm ; height 60cm) on the rubble originated from porous basalt rock in North-Cheju was accomplished. Then strength parameters for basalt rubble produced in North-Cheju are recommended to be c:0.3kg/$cm^2\; and \phi=36^{\circ}$ if the compressive strength of parent rock is greater than 400kg/$cm^2$. And the shear behavior characteristics of rubble, represented as particle breakage and dilatancy, are investigated.