한국결정성장학회지 (Journal of the Korean Crystal Growth and Crystal Technology)

  • 제12권1호
  • /
  • Pages.31-35
  • /
  • 2002
  • /
  • 1225-1429(pISSN)
  • /
  • 2234-5078(eISSN)
한국결정성장학회 (The Korea Association of Crystal Growth)
권호 표지

스피넬 전성형체의 $La_2$O_3-A1_2O_3-SiO_2$계 유리 침투 kinetic

Kinetic Study Of $La_2$O_3-A1_2O_3-SiO_2$ glass infiltration into Spinel Preforms

  • 이득용 (대림대학 재료정보공학과) ;
  • 장주웅 ((주)우리동명 치과재료연구소) ;
  • 김병수 ((주)우리동명 치과재료연구소) ;
  • 김대준 (KIST 복합기능세라믹센터) ;
  • 송요승 (한국항공대학교 항공재료공학과)
  • 발행 : 2002.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

상용 스피넬 분말(0.94$\mu$m)을 $1300^{\circ}C$ 2시간 열처리한 후 30분 동안 습식혼합하여 3.29$\mu$m의 최종분말을 제조하여 die-press법을 이용하여 $1100^{\circ}C$에서 2시간 1차 소결하여 다공성 전성형체를 제조하고 $1080^{\circ}C$에서 0~2시간가지 $La_2O_3-A1_2O_3-SiO_2$계 유리를 용응 침투시켜 유리 침투 깊이와 시간간의 kinetic을 조사하였다 유리 침투시간이 증가할수록 침투깊이는 모세관압에 의하여 parabolic하게 증가하였다. 유리-스피넬 복합체의 강도와 인성값은 각각 317MPa, 3.56MPa . $m^{1/2}$이 었으며 $1300^{\circ}C$의 높은 하소온도로 인한 재결정에 의하여 스피넬은 침상과 다각형 조직이 동시에 존재하는 이중 미세조직 이 관찰되었다.

Abstract Spinel powder having a particle size of 0.9$\mu$m was calcined for 30 min at $1300^{\circ}C$, followed by ball milling for 4h, to obtain the spinel particle size of 3.29$\mu$m. The die-pressed spinel was presintered at $1100^{\circ}C$ for 2h and then lanthanum aluminosilicate glass was infiltrated at $1080^{\circ}C$ for 0~2 h to investigate the penetration kinetics in glass-spinel composite. The infiltration distance is parabolic in time due to capillarity. The strength and the fracture toughness of glassspinel composites were 317 MPa and 3.56 MPa $m^{1/2}$ respectively and dual microstructure of column (needle) and polygonal shapes as a result of recrystallization was observed due to the high calcination temperature.

키워드

참고문헌

  1. Oxide Ceramics E. Ryshkewitch
  2. J. Mater. Sci. Lett. v.16 no.1841 Grain Growth in Sintered MgAl₂O₄Spinel H.C. Park;Y.B. Lee;K.D. Oh;F.L. Riley
  3. Acta Mater v.47 no.3 Hot-pressing of Magnesium Aluminate Spinel-I. Kinetics and Densification Mechanism C.-J. Ting;H.-Y. Lu https://doi.org/10.1016/S1359-6454(98)00400-5
  4. Acta Mater v.47 no.3 Hot-pressing of Magnesium Aluminate Spinel-II. Mocrostructure Development C.-J. Ting;H.-Y. Lu https://doi.org/10.1016/S1359-6454(98)00401-7
  5. J. Eur. Ceram. Soc. v.15 no.249 Aluminum Magnesium Oxynitride: A new Transparent Spinel Ceramic A. Granon;P. Goeuriot;F. Thevenot
  6. J. Am. Ceram. Soc. v.82 no.12 Characterization of MgAl₂O₄Precursor Powders Prepared by Aqueous Route V. Montouillout;D. Massiot;A. Douy;J.P. Coutures https://doi.org/10.1111/j.1151-2916.1999.tb02243.x
  7. Ceram. Intl. v.25 no.485 Effect of Attritor Milling on the Densification of Magnesium Aluminate Spinel R. Sarkar;S.K. Das;G. Banerjee
  8. Comm. Am. Ceram. Soc. v.71 no.2 Melt Infiltration Approach to Ceramic Matrix Composites W.B. Hillig
  9. Ceram. Eng. Sci. Proc. v.6 no.674 Ceramic Composites by Infiltration W.B. Hillig
  10. J. Am. Ceram. Soc. v.82 no.11 Mechanical Properties of Tape Cast Alumina-glass Dental Composites D.-J. Kim;M.-H. Lee;C.-E. Kim https://doi.org/10.1111/j.1151-2916.1999.tb02219.x
  11. J. Am. Ceram. Soc. v.76 no.10 Melt-infiltration Processing and Fracture Toughness of Alumina-glass Dental Composites W.D. Wolf;L.F. Francis;C.-P. Lin;W.H. Douglas https://doi.org/10.1111/j.1151-2916.1993.tb04004.x
  12. Ph. D. Dissertation Strength Microstructure Relationships in a Dental Alumina Glass Composite H. Hornberger
  13. J. Am. Ceram. Soc. v.82 no.12 Kinetic Study of Cobalt Silicide Infiltration into Silicon Carbide Preforms Y. Pan;X.S. Yi;J.L. Baptista https://doi.org/10.1111/j.1151-2916.1999.tb02265.x
  14. J. Am. Ceram. Soc. v.79 no.1 Spontaneous Infiltration of Alumina by Copper-oxygen Alloy E.J. Gonzalez;K.P. Trumble https://doi.org/10.1111/j.1151-2916.1996.tb07888.x
  15. J. Am. Ceram. Soc. v.79 no.1 Spontaneous Infiltration of Aluminum-silicon Alloy into Silicon Carbide preofrms in Air X.M. Xi;X.F. Yang
  16. J. Mater. Sci. Lett. v.9 no.503 Metal Infiltration of Selected Intermetallics into SiC J.C. Rawers;W.R. Wrzesinski
  17. J. Am. Ceram. Soc. v.80 no.12 Viscous Sintering and Mechanical Properties of 3Y-TZP-reinforced LAS Glass-ceramic Composites S.Y. Choi;J.M. Ahn https://doi.org/10.1111/j.1151-2916.1997.tb03223.x
  18. J. Kor. Ceran. Soc. v.36 no.12 Mechanical properties of Alumina-glass Dental Composites Prepared of Alumina-glass Dental Composites Prepared from Aqueous-based Tape Casting M.-H. Lee;D.-J. Kim;D.Y. Lee;J.-H. Lee;C.-E. Kim
  19. J. Kor. Ceram. Soc. v.38 no.9 Glass-alumina Composites Prepared by Melt-infiltration:I.Effect of Alumina Particle Size D.Y. Lee;J.-W. Jang;M.-H. Lee;D.-J. Kim;I.-S. Park;J.-K. Lee;B.-Y. Kim
  20. Acta Metall. Mater. v.40 no.9 Sintering Densification for Powder Mixtures of Varying Distribution Widths R.M. German https://doi.org/10.1016/0956-7151(92)90125-X
  21. J. Am. Ceram. Soc. v.71 no.12 Effect of Particle Size Distribution on the Sintering of alumina T. Yeh;M.D. Sacks
  22. J. Am. Ceram. Soc. v.72 no.5 Effects of Particle Packing Characteristics on Solid-state Sintering J. Zheng;J.S. Reed https://doi.org/10.1111/j.1151-2916.1989.tb06222.x
  23. J. Am. Ceram. Soc. v.67 no.4 Sintering of Bimodally Distributed Alumina Powders J.P. Smith;G.L. Messing https://doi.org/10.1111/j.1151-2916.1984.tb19495.x
  24. J. Am. Ceram. Soc. v.79 no.2 Capillary Infiltration Rates into Porous Media with Applications to Silcomp Processing E.O. Einset https://doi.org/10.1111/j.1151-2916.1996.tb08125.x