Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

The Study on the New Encoder for High Performance Exciting Angle Control

SRM의 고정도 여자각 제어를 위한 새로운 엔코더

  • Published : 2002.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

In switched reluctance motor(SRM) drive, it is important to synchronize the stator phase excitation with the rotor position; therefore, the information about rotor position is essential. Generally, optical encoders or resolvers are used to provide the information. However, these sensors are expensive and are not suitable for high-speed operation. The accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. In the high-speed region, switching angles are fluctuated back and forth out of the preset value, which is caused by the sampling period of the microprocessor. In this paper, a low cost linear encoder suitable far the practical and stable SRM drive is proposed and also the control algorithm to generate the switching signals using a simple digital logic is presented. The validity of the proposed linear encoder with a proper logic controller is verified through the experiments.

Keywords

References

  1. B. K. Bose, T. J. E. Miller, P. M. Szezesny, and W. H. Bocknell, 'Microcomputer control of switched reluctance motor,' IEEE Trans. Industrial Application, vol. 22, no. 4, pp. 708-715, 1986
  2. I. Husain and M. Ehsani, 'Torque ripple minimization in switched reluctance drives by PWM current control,' IEEE Trans. Power Electronics, vol. 11, no. 1, pp. 91-98, 1996
  3. C. Wu and C. Pollock, 'Analysis and reduction of vibration and acoustic noise in the switched reluctance drive,' IEEE Trans. Industrial Applications, vol. 31, no. 1, pp. 91-98, 1995 https://doi.org/10.1109/28.363045
  4. D. E. Cameron, J. H. Lang, and S. D. Umans, 'The origin and reductionof acoustic noise in doubly salient variable-reluctance motors,' IEEE Trans. on Industrial Applications, vol. 28, no. 6, pp. 1250-1255, 1992 https://doi.org/10.1109/28.175275
  5. Graham E. Dawson, Anthony R. Eastham, and Jerzy Mizia; 'Switched reluctance motor torque characteristics : finite element analysis and test results,' IEEE Trans. on IA, vol. 23, no. 3, pp. 532-537, 1987
  6. M. Moallerm, 'Predicting torque of switched reluctance machine from its finite-element field solution,' IEEE Trans on Energy Conversion, vol. 5, no. 2, pp. 733-739, 1990 https://doi.org/10.1109/60.63147