참고문헌
- Metals and Materials International v.7 no.5 Developing SPD methods for processing bulk nanostructured materials with enhanced properties R. Z. Valiev https://doi.org/10.1007/BF03027081
- Acta Materialia v.45 no.11 An investigation of microstructural evolution during equal channel angular pressing Y. Iwahashi;Z. Horita;M. Nemoto;T. G. Langdon https://doi.org/10.1016/S1359-6454(97)00100-6
- Acta Materialia v.49 no.1 Microstructure of two-phase Al-1.7Cu alloy deformed by equal-channel angular pressing M. Murayama;Z. Horita;K. Hono https://doi.org/10.1016/S1359-6454(00)00308-6
- Metallurgical and Materials Transactions A v.33 no.3 Structural evolution of a etrip-cast Al alloy sheet processed by continuous equal-channel angular pressing J. C. Lee;H. K. Seok;J. Y. Suh;J. H. Han;Y. H. Chung https://doi.org/10.1007/s11661-002-0128-z
- 대한금속재료학회지 v.39 no.2 ECAP 강가공에 의한 5083 Al 합금의 결정립 미세화 이정국;신동혁(외)
- Acta Materialia v.50 no.3 Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-grained Al-Mg alloys S. Lee;A. Utsunomiya;H. Akamatsu;K. Neishi;M. Furukawa;Z. Horita;T. G. Langdon https://doi.org/10.1016/S1359-6454(01)00368-8
- Materials Science and Engineering v.A300 no.1-2 Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation A. Yamashita;Z. Horita;T. G. Langdon
- Acta Materialia v.49 no.18 Influence of magnesium on grain refinement and ductility in a dilute Al-Sc alloy M.Furukawa;A.Utsunomiya;K.Matsubara;Z.Horita;T.G.Langdon https://doi.org/10.1016/S1359-6454(01)00262-2
- Scripta Materialia v.45 no.8 Effect of aging treatment on heavily deformed microstructure of a 6061 aluminum alloy after equal channel angular pressing J. K. Kim;H. G. Jeong;S. I. Hong;Y. S. Kim;W. J. Kim https://doi.org/10.1016/S1359-6462(01)01109-5
- Journal of Materials Processing Technology v.117 no.3 Improvement of mechanical properties for Al alloys using equal-channel angular pressing Z. Horita;T. Fujinami;M. Nemoto;T. G. Langdon https://doi.org/10.1016/S0924-0136(01)00783-X
- Materials Science and Engineering v.A319-321 Cyclic response of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing V. Patlan;K. Higashi;K. Kitagawa;A.Vinogradov;M. Kawazoe
- Nanostructured Materials v.11 no.7 Fatigue properties of 5056 Al-Mg alloy produced by equal-channel angular pressing A. Vinogradovl;S. Nagasaki;V. Patlan;K. Kitagawa;M. Kawazoe https://doi.org/10.1016/S0965-9773(99)00392-X
- Materials Science and Engineering A v.A300 no.1-2 Overview of fatigue properties of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing V. Patlan;A. Vinogradov;K. Higashi;K. Kitagawa
- Materials Science and Engineering A v.A297 no.1-2 Optimizing the procedure of equal-channel angular pressing for maximum superplasticity S. Komura;M. Furukawa;Z. Horita;M. Nemoto;T. G. Langdon
- Scripta Materialia v.44 no.5 Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP H. Akamatsu;T. Fujinami;Z. Horita;T. G. Langdon https://doi.org/10.1016/S1359-6462(00)00666-7
- J. of Mat. Sci. v.20 Effect of superplastic deformation on the grain size and tensile properties of 7010 alloy sheet A. J. Shakesheff;P. G. Partridge https://doi.org/10.1007/BF00556070
- Acta Materialia v.44 no.4 Origin of cube texture during hot rolling of commercial Al-Mn-Mg alloys O. Daaland;E. Nes https://doi.org/10.1016/1359-6454(95)00289-8
- Acta Materialia v.44 no.4 Recrystallization texture development in commercial Al-Mn-Mg alloys O. Daaland;E. Nes https://doi.org/10.1016/1359-6454(95)00290-1
- Mater.Trans. JIM v.33 Effect of grain boundary characters on grain boundary sliding during superplastic deformation T. Haruna;T. Shibayanagi;S. Hori;N. Furushiro https://doi.org/10.2320/matertrans1989.33.374