Numerical Modeling of Combustion Processes and Pollutant Formations in Direct-Injection Diesel Engines

  • Kim, Yong-Mo (Department of Mechanical Engineering, Hanyang University) ;
  • Lee, Joon-Kyu (Department of Mechanical Engineering, Hanyang University) ;
  • Ahn, Jae-Hyun (Department of Mechanical Engineering, Hanyang University) ;
  • Kim, Seong-Ku (Korea Aerospace Research Institute)
  • 발행 : 2002.07.01

초록

The Representative Interactive Flamelet (RIF) concept has been applied to numerically simulate the combustion processes and pollutant formation in the direct injection diesel engine. Due to the ability for interactively describing the transient behaviors of local flame structures with CFD solver, the RIF concept has the capabilities to predict the auto-ignition and subsequent flame propagation in the diesel engine combustion chamber as well as to effectively account for the detailed mechanisms of soot formation, NOx formation including thermal NO path, prompt and nitrous 70x formation, and reburning process. Special emphasis is given to the turbulent combustion model which properly accounts for vaporization effects on the mixture fraction fluctuations and the pdf model. The results of numerical modeling using the RIF concept are compared with experimental data and with numerical results of the commonly applied procedure which the low-temperature and high-temperature oxidation processes are represented by the Shell ignition model and the eddy dissipation model, respectively. Numerical results indicate that the RIF approach including the vaporization effect on turbulent spray combustion process successfully predicts the ignition delay time and location as well as the pollutant formation.

키워드

참고문헌

  1. Amsden, A. A., 1997, 'KIVA-3V: A Block Structured KIVA Program for Engines with Vertical or Canted Valves,' Los Alamos National Laboratory report LA-13313-MS
  2. Barths, H., Antoni, C. and Peters, N., 1998, 'Three-Dimensional Simulation of Pollutant Formation in a DI Diesel Engine Using Multiple Interactive Flamelets,' SAE Paper 982459
  3. Beatrice, C., Belardini, P., Bertoli, C., Cameretti, M. C. and Cirillo, N., 1995, 'Fuel Jet Models for Multidimensional Diesel Combustion Calculation: An Update,' SAE Paper 950086
  4. Demoulin, F. X. and Borghi, R., 2000, 'Presumed Pdf Modeling of Turbulelnt Spray Combustion,' Combust. Sci. and Tech., (accepted)
  5. Halstead, M. P., Kirsch, L. J., Prothero, A. and Quinn, C. P., 1975, 'A Mathematical Model for Hydrocarbon Auto-ignition at High Pressures,' Proc. R. Soc. Lond., A. 346, pp. 515-538 https://doi.org/10.1098/rspa.1975.0189
  6. Heywood, J. B., 1988, Internal Combustion Engine Fundamentals, Mcgraw-Hill, New York, pp. 572-592
  7. Kim, S. K., Kang, S. M. and Kim, Y. M., 2001, 'Flamelet Modeling for Combustion Processes and NOx Formation in the Turbulent Nonpremixed CO/H₂/N₂Jets Flames,' Combust. Sci. and Tech., Vol. 168, pp. 47-83, 2002 https://doi.org/10.1080/00102200108907831
  8. Kim, Y. M., Shnag, H. M. and Chen, C. P., 1994, 'Studies on Droplet-Turbulence Interaction,' KSME J. Vol. 8, No. 4, pp. 364-374
  9. Kong, S. C., Han, Z. and Reitz, R. D., 1995, 'The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation,' SAE Paper 950278
  10. Magnussen, B. F. and Hjertager, B. H., 1977, 'On Mathematical Modeling of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion,' 16th Symposium (International) on Combustion, pp. 719-729
  11. Moss, J. B., Stewart, C. D. and Young, K. J., 1995, 'Modeling Soot Formation and Burnout in a High Temperature Laminar Diffusion Flame Burning Under Oxygen-Enriched Conditions,' Combustion and Flame, Vol. 101, pp. 491-500 https://doi.org/10.1016/0010-2180(94)00233-I
  12. O'Rourke, P. J., 1981, Technical Report LA-9069-T, Los Alamos National Laboratory
  13. Patterson, M. A., Kong, S. C., Hampson, G. J. and Reitz, R. D., 1994, 'Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions,' SAE Paper 94-523
  14. Peters, N., 1984, 'Laminar Diffusion Flamelet Models in Non-Premixed Turbulent Combustion,' Prog. Energy Combust. Sci., Vol. 10, pp. 319-339 https://doi.org/10.1016/0360-1285(84)90114-X
  15. Pitsch, H. and Peters, N., 1998, 'Investigation of the Ignition Process of Sprays Under Diesel Conditions Using Reduced n-Heptane Chemistry,' SAE Paper 982464
  16. Pitsch, H., Barths, H. and Peters, N., 1996, 'Three-Dimensional Modeling of NOx and Soot Formation in DI-Diesel Engines Using Detailed Chemistry Based on the Interactive Flamelet Approach,' SAE Paper 962057
  17. Reveillon, J. and Vervish, L., 2000, 'Spray Vaporization in Nonpremixed Turbulent Combustion Modeling: A Single Droplet Model,' Combustion and Flame, Vol. 121, pp. 75-90 https://doi.org/10.1016/S0010-2180(99)00157-1
  18. Sazhina, E. M., Sazhin, S. S., Heikal, M. R., Babushok, V. I. and Johns, R. J. R., 2000, 'A Detailed Modeling of the Spray Ignition Process in Diesel Engines,' Combust. Sci. and Tech., Vol. 160, pp. 317-344 https://doi.org/10.1080/00102200008935806
  19. Venkatesan, C. P., Abraham, 2000, 'An Investigation of the Dependence of NO and Soot Emissions from a Diesel Engine on Heat Release Rate Characteristics-1,' SAE Paper 2000-01-0509
  20. Wan, Y. P., Pitsch, H. and Peters, N., 1997, 'Simulation of Auto-ignition Delay and Location of Fuel Sprays Under Diesel-Engine Relevant Conditions,' SAE Paper 971590