승용차용 Wheel Bearing Hub Unit 설계를 위한 주행 하중조건의 실험적 연구

Experimental Study of Driving Load Conditions for the Wheel Bearing Hub Unit of Passenger Car

  • 발행 : 2002.03.01

초록

The wheel bearing hub unit is developed type of wheel bearing unified with the hub parts. It has advantage of reducing the weight and the number of components. And, it also improves uniformity of manufacturing quality, In order to design the wheel bearing hub units, many techniques are used such as load analysis, structure analysis and bearing characteristics analysis and so forth. These techniques need highly accurate load conditions founded on service conditions. In this study, to design the wheel bearing hub units used widespread in passenger cars, the service load was measured through driving tests on the public roads and in the special events. The public roads are classified into highway, intercity road, rural road, urban road, and unpaved road so as to know what the characteristics of the road loads are. The results of the tests showed that the wheel force was relative to the lateral acceleration, and also could be calculated from the lateral acceleration. The lateral acceleration was measured from 0.0G to 0.6G in general driving on the public roads, with different distributions in each road type. In special events, the maximum lateral acceleration was measured from 0.8G to 1.3G.

키워드

참고문헌

  1. S. A. Benktander, 'Automotive Hub Bearing Units - European Experience,' SAE 810757, 1981
  2. Automotive Hub Design - Part 2, Automotive Engineering, February/March, pp.62-63, 1980
  3. G. Lundberg, A. Palmgren, 'Dynamic Capacity of Rolling Bearings' Acta Polytechnica, Mechanical Engineering Series 1, Royal Swedish Acad. Eng., No.3, 1947
  4. G. Lundberg, A. Palmgren, 'Dynamic Capacity of Roller Bearings,' Acta Polytechnica 96, Mechanical Engineering Series 2, Royal Swedish Acad. Eng., No.9, 1952
  5. ISO 281/1, Rolling Bearing - Dynamic Load Rating and Rating Life, International Standardization Organization, 1977(E)
  6. 박노식 , 이상범, 'Load Life법을 이용한 비조질강 Wheel Hub 피로수명 예측,' 한국자동차공학회 추계학술대회 논문집, pp.800-805, 1997
  7. 김기훈, 유영면, 임종순, 현준수, 'Wheel Bearing Unit의 구조해석을 위한 경계조건 설정에 관한 연구,' 자동차공학회논문집, 제8권제16호, pp.230-237, 2000
  8. S. Y. Poon, S. G. Williams, 'Evaluation of a Hub Assembly,' Automotive Engineer, August/September, pp.16-19, 1977
  9. G. G. Gilbert, W. E. Harbottle, 'UNIPAC - An Independently Sprung Driving Wheel Bearing,' SAE 790714, 1979
  10. G. G. Gilbert, M. R. Hoeprich, H. J. Wasik, 'Computerized Bearing System Analysis Tuned for Front Wheel Drive Vehicle,' SAE 800006, 1980
  11. P. Grote, J. Fash, Integration of Structural Dynamics Testing and Durability Analysis, Sound and Vibration, 1987
  12. V. V. Deshpande, S. Raju, 'Generalization of Road Inputs to Vehicles,' Symposium on Indian Automotive Technology '94, pp.325-331, 1994
  13. K. Maeda, H. Kashimura, K. Sahashi, 'Properties of NKJ65 Long Life Medium Carbon Steel and its Application to Automobile Wheel Bearings,' NTN Technical Review, No.65, pp.23-29, 1996
  14. W. F. Milliken, D. L. Milliken, 'Race Car Vehide Dynamics,' SAE pp.665-708, 1995
  15. B. J. Cave, H. P. Nixon, 'A Family of Tapered Roller Bearings for Front Wheel Drive Vehicles,' SAE 810756, 1981