Effect of RF Etch Conditions on Metal Contact Resistance

금속 접촉 저항에 대한 RF 식각 조건의 영향

  • 김도우 (하이닉스반도체(주)) ;
  • 정철모 (하이닉스반도체(주)) ;
  • 구경완 (영동대학교 정보전자공학부) ;
  • 왕진석 (충남대학교 정보통신공학부)
  • Published : 2002.04.01

Abstract

The resistances of metal2 contact to metall and poly Si are checked by various RF etch conditions in terms of pre-cleaning. The changes of resistance are evaluated by statistical analysis method(SAS) for the AC bias power, coil power and RF target. The contact area on poly Si is shown by TEM image and the distributions of contact resistance according to ar etch target and RTP are investigated. The RTP groups have larger variations than normal RF etch targets. When the RF etch target becomes lower and coil power becomes higher, the resistances of metal2 contact to metals and poly Si have lower contact resistance. But the condition of AC bias power did not satisfied low meta12 contacts resistance for metall and poly Si simultaneously. The R-square of ststistical analysis was 0.98 for resistances of meta12 contact to poly Si and 0.87 for resistances of meta12 contact to metall.

Keywords

References

  1. G. A. Dixit, et al., 'Ion Metal Plasma Deposited Titanium Liners for 0.25/0.18um Multilevel Interconnections,' IEDM, p. 357, 1996 https://doi.org/10.1109/IEDM.1996.553602
  2. H. J. Barth, et al., 'Integration of a Novel IMP Ti/TiN Barrier with W-Plug Fill for Contact and via Application,' Proceedings VMIC, p. 225, 1997
  3. A. Paranjpe, et al., J. Vac. Sci. Technol., Vol. B13, p. 2105, 1995
  4. Z. Wang, et al., 'IMP Ti/IMP TiN and IMP Ti/CVD TiN Liners for W-Plug Metallization Schemes,' Proceedings VMIC, p. 258, 1997
  5. G. S. Sandhu, et al., 'Metalorganic chemical vapor deposition of TiN films for advanced metallization,' Appl. Phys. lett., 62, p. 240, 1993 https://doi.org/10.1063/1.108977
  6. D. W. Kim, et al, 'Electrical characteristics for Metal Contact in ULSI Interconnection Applications,' Proceedings VMIC, p. 480, 2000
  7. D. Butler, et al, 'Integration of a Hi-Fill Ti/TiN Process into a 0.5um W-Plug Metallization Scheme,' Proceedings VMIC, p. 156, 1996
  8. S. M. Rossnagel, et al, 'Metal ion deposition from ionized magnetron sputtering discharge', J. Vac. Sci. Technol. Bol. B12(1), p. 449, 1994 https://doi.org/10.1116/1.587142
  9. J. P. Dekker, et al., 'A kinetic study of Titanium Nitride Chemical Vapor Deposition Using Nitrogen, Hydrogen, and Titanium Tetrachloride,' J. Elctrochem. Soc., Vol. 141, p. 787, 1994 https://doi.org/10.1149/1.2054812
  10. H. O. Pierson, et al, 'Handbook of Chemical Vapor Deposition,' Noyes Publications, p. 225, 1992
  11. A. Weber, et al, 'Low Temperature Deposition of TiN using Tetrakis-Titanium in an Electron Cyclotron Resonance Plasma Process', J. Electrochem. Soc. 141, p. 849, 1994 https://doi.org/10.1149/1.2054820
  12. K. Ikeda, et al, ' TiN Thin Film Prepared by Chemical Vapor Deposition Method Using $Cp_2Ti(N_3)_2$,' Jpn. J. Appl. Phys. 32, p. 3085, 1993
  13. R. W. Mann, et al, 'Reduction of the $C54-TiSi_2$ phase transformation temperature using refractory metal ion implantation', Appl. Phys. Lett. 67, p. 3729, 1995 https://doi.org/10.1063/1.115364
  14. R. T. Tung, et al, 'Growth of $TiSi_2$ from codeposited TiSix layers and interfacial layers', Appl. Phys. Lett., 70, p. 2386, 1997 https://doi.org/10.1063/1.118880
  15. R. T. Tung, 'Surface nucleation of Ti silicides at elevated temperatures', Appl. Phys. Lett. 68, 1933, 1996 https://doi.org/10.1063/1.115630