Fine Structure Formation and Properties with Drawing of Poly(butylene terephthalate) Films(II) -Effects of High Temperature and High Speed Drawing-

Poly(butylene terephthalate) 필름의 연신에 따른 미세구조 형성과 물성(II) -고온 및 연신속도에 따른 영향-

  • 이선희 (부산대학교 섬유공학과) ;
  • 조현혹 (부산대학교 섬유공학과)
  • Published : 2002.02.01

Abstract

The effects of drawing temperature and speed on the fine structure and properties of PBT films were investigated using WAXD, density, DSC, Rheovibron, TMA, tensile test, etc. It has been shown that $\alpha$/$\beta$-crystal components can be obtained in both high temperature and high speed drawn PBT films. Especially, WAXD equatorial profile results hale shown that the reflection observed at 2$\theta$= 16.8$^{\circ}$and 22.40$^{\circ}$are assigned to the (010) and (100) reflections of $\beta$-crystal respectively, and that the reflection peak is sharper at higher drawing temperatures and speeds. This tendency agreed with the DSC thermograms results. Density decreased due to the conversion of the $\alpha$-crystal (1.396g/㎤) to the lower density $\beta$-crystal during the drawing process. The shrinkage decreased as the drawing temperature and the drawing speed increased. Initial modulus is increased at higher drawing temperature and speeds and maximum values were obtained at a drawing temperature of 18$0^{\circ}C$ and speed of 500cm/min.

Keywords

References

  1. J. Korean Fiber Soc. v.38 Fine Structure Formation and Properties with Drawing of Poly(butylene terephthalate) Films(Ⅰ)-Effect on Drawn and Heat Setting Temperature S.H. Lee;H.H. Cho
  2. J. Polym. Sci.: Polym. Phys. v.33 Rapid Mechanical Deformation of Poly(Ethylene Terephthalate) Fibers at Temperatures Above the Glass Transition H.A. Hristov;J.W.S. Hearle;J.M. Schultz;A.D. Kenedy
  3. J. Appl. Polym. Sci. v.26 Mechanical Properties and Superstructure of High-Modulus and High-Strength PET Fiber Prepared by Zone Annealing T. Kunugi;A. Suzuki;M. Hashimoto
  4. Polymer v.39 Application of a Zone-drawing and Zone-annealing Method to Poly(ethlyene-2,6-naphthalate) Fibers A. Suzuki;Y. Nakamura;T. Kunugi
  5. J. Appl. Polym. Sci. v.67 Preparation of High-Modulus Nylon 6 Fibers by Vibrating Hot Drawing and Zone Annealing T. Kunugi;K. Chida;A. Suzuki
  6. J. Polym. Sci.:Polym. Phys. v.37 Microstructure and Mechanical Properties of Hot-Air Drawn Poly(ethylene terephthalate) Fibers A. Suzuki;Y. Nakamura;T. Kunugi
  7. Polymer v.40 Microstructure and Mechanical Properties of Hot-air Drawn Poly(ethylene-2,6-naphthalate) Fibers A. Suzuki;Y. Nakamura;T. Kunugi
  8. J. Polym. Sci.:Polym. Phys. v.38 Strain-Rate Dependence of the Microstructure and Mechanical Properties for Hot-Air-Drawn Nylon 6 Fibers A. Suzuki;K. Koito
  9. Polymer v.37 Orientation and Structure of Drawn Poly(ethylene terephthalate) A. Ajji;J. Guevremont;K.C. Cole;M.M. Dumoulin
  10. J. Polym. Sci.: Polym. Phys. v.13 Crystal Deformation in Aromatic Polyesters R. Jakeways;I.M. Ward;M.A. Wilding;I.H. Hall;I.J. Desborough;M.G. Pass
  11. J. Polym. Sci.:Polym. Lett. Ed. v.14 Reversible Crystal Deformation and Conformational Changes in Poly(tetramethylene terephthalate) R. Jakeways;T. Smith;I.M. Ward;M.A. Wilding
  12. Polymer v.17 Chain Conformation of Poly(tetramethylene terephthalate) and Its Change with Strain I.H. Hall;M.G. Pass
  13. Colloid & Polym. Sci. v.254 Rontgenuntersuchungen zur Kristallstruktur von Polybutyleneterephthalate(PBT) U. Alter;R. Bornart
  14. Polymer v.18 A Comparison of Published Crystalline Structures of Poly(tetramethylene terephthalate) I.J. Desborough;I.H. Hall
  15. Macromolecules v.13 Solid-state Transition of Poly(butylene terephthalate) Indeced by Mechanicl Deformation K. Tashiro;Y. Nakai;M. Kobayashi;H. Tadokoro
  16. Colloid & Polym. Sci. v.258 Small Angle X-ray Scattering Studies of Poly(ethyelene terephthalate) and Poly(butylene terephthalate) B. Bornschlegl;R. Bonart
  17. Colloid & Polym. Sci. v.259 Untersuchungen zum Dehnungsverhalten von Polybutyleneterephthalat(PBT)Folien U. Alter;R. Bornart
  18. Colloid & Polym. Sci. v.260 The Stressinduced Crystalline Phase Transition in Poly(tetramethylene terephthalate) W. Storhmeier;W.F.X. Frank
  19. Polymer v.24 The and Structural Forms of Poly(tetramethylene terephthalate): a Study by Broad Line Nuclear Magnetic Resonance I.S. Davison;A.J. Manuel;I.M. Ward
  20. Macromolecules v.18 Models of the Structural Phase Transition in Poly(butylene terephthalate) V.K. Datye;P.L. Taylor
  21. Macromolecules v.20 Relaxation Behavior of the Phase of Poly(butylene terephthalate) B.C. Perry;J.L. Koenig;J.B. Lando
  22. Macromolecules v.21 High-Resolution Solid-State 13C NMR Study of the and Crystalline Forms of Poly(butylene terephthalate) M.A. Gomez;M.H. Cozine;A.E. Tonelli
  23. Macromolecules v.21 Theory of the Phase Transition under Stress in Poly(butylene terephthalate) R. Al-Jishi;P.L. Taylor
  24. Macromolecules v.22 Structural and Energetic Analysis of the to Phase Transition in Poly(butylene terephthalate) R.P. Grasso;B.C. Perry;J.L. Koenig;J.B. Lando
  25. J. Appl. Polym. Sci. v.45 Structural Formation in Stretched Sheets of Poly(butylene terephthalate) A. Kaito;K. Nakayama;Zubaidi
  26. Polym. Eng. Sci. v.38 Formation and Characterization of Cast and Biaxially Stretched Poly(Butylene Terephthalate) Film K. Song;J.L. White
  27. J. Polym. Sci.:Polym. Phys. v.35 Tensile Drawing, Morphology, and Mechanical Properties of Poly(buylene terephthalate) P.L. Carr;R. Jakeways;J.L. Klein;I.M. Ward
  28. J. Appl. Polym. Sci. v.78 Mechanical and Dynamic Mechanical Thermal Properties of Heat and Oil-Resistant Thermoplastic Elastomeric Blends of Poly(butylene terethalate) and Acrylate Rubber A. Jha;A.K. Bhowmick
  29. Thermal Characterization of Polymeric Materials(2nd Ed.) M. Jaffe;J.D. Menezel;W.E. Bessey;E.A. Turi(ed.)