Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

The Shear and Friction Characteristics Analysis of Inconel 718 during End-milling process using Equivalent Oblique Cutting System I -Up Endmilling-

등가경사절삭 시스템에 의한 Inconel 718 엔드밀링 공정의 전단 및 마찰특성 해석 I -상향 엔드밀링-

  • Published : 2002.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

In end milling process the undeformed chip thickness and the cutting force components vary periodically with phase change of the tool. In this study, up end milling process is transformed to the equivalent oblique cutting. The varying undeformed chip thickness and the cutting force components in end milling process are replaced with the equivalent average ones. Then it can be possible to analyze the chip-tool friction and shear process in the shear plane of the end milling process by the equivalent oblique cutting system. According to this analysis, when cutting Inconel 718, 61, 64 and 55% of the total energy is consumed in the shear process with the helix angle 30$^{\circ}$, 40$^{\circ}$ and 50$^{\circ}$ respectively, and the balance is consumed in the friction process. With the helix angle of 40$^{\circ}$ the specific cutting energy consumed is smaller than with the helix angle 30$^{\circ}$ and 50$^{\circ}$.

Keywords

References

  1. Martellotti, M.E., 'An Analysis of the Milling Process,' Trans. of ASME, Vol. 63, pp. 677-700, 1941
  2. Tlusty, J. and Macneil, P., 'Dynamics of Cutting Forces in End Milling,' Annals of CIRP, Vol. 24, pp. 21-25, 1975
  3. Fussell, B. K. and Srinivasan, K., 'An Investigation of the End Milling Process Under Varying Machining Conditions,' Trans of ASME, Vol. 111, pp. 27-36, 1989 https://doi.org/10.1115/1.3188729
  4. Zorev, N.N., 'Interrelationship Between Shear Processes Occurring Along Tool Face and on Shear Plane in Metal Cutting,' Pro. Inter. Res. Prod. Conf., Carnegie Inst. of Tech., pp. 42-49, 1963
  5. Shaw, M. C., 'Metal Cutting Principles, 3rd ed.,' The MIT Press, MIT, Cambridge, Massachusetts, pp. 13-18-13-29, 1957
  6. 이영문, 송태성, 박태준, 장은실, '3차원 절삭시칩-공구 마찰 및 전단특성 해석,' 한국정밀공학회지, 제 16권, 제 6호, pp. 190-196, 1999
  7. 최영준, 주종남, '마모를 고려한 절삭력 예측모델,' 한국정밀공학회 춘계학술대회 논문집, pp. 1042-1047, 2001
  8. 이영문, 송태성, 심보경, '엔드밀링의 전단특성 및 마찰특성해석,' 대한기계학회 추계학술대회논문집 A, pp. 724-729, 2000
  9. Shaw, M.C., 'Metal Cutting Principles,' Clarendon Press, oxford, pp. 428-438, 1984
  10. Shaw, M.C., and Finnie, I., 'The Shear Stress in Metal Cutting,' Trans. of the ASME, Vol. 77, pp. 115-125, 1955