References
- Buma, S., 'Toyota Active Suspension System for the 1989 Celica,' Proceeding of the International Symposium on Active Control of Sound and Vibration, Tokyo, Japan, pp. 517-521, April 1991
- Cho, D. and Hedrick, J.K., 'Pneumatic Actuators for Vehicle Active Suspension Applications,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 107, No. 3, pp. 67-72, 1985 https://doi.org/10.1115/1.3140709
- Sharp, R. S. and Hassen, J. H., 'Performance Predictions for a Pneumatic Active Car Suspension System,' Proc. Instn. Mech. Engrs, Part D, Vol. 39, No. 6, pp. 649-656, 1988
- Stein, G.J. and Ballo, I., 'Active Vibration Control System for the Driver's seat for Off-road Vehicles,' Vehicle System Dynamics, Vol. 20, No. 1, pp. 57-78, 1991 https://doi.org/10.1080/00423119108968980
- Stein, G.J., 'Results of Investigation of an Electro Pneumatic Active Vibration Control System for a Driver's seat,' Imeche part D, Vol. 209, No. 3, pp. 227-234, 1995
- Kim, Y. B, Yi, H. B. and Lee, B. K., 'Design and Application of Magnetic Damper for Reducing Rotor Vibration, ' International KSME Journal, Vol. 24, No. 2, pp. 355-361, 2000
- Nikdajsen, J., Holmes, R., and Gondhalekar, V., 'Investigation of an Electromagnetic Damper for Vibration Control of a Transmission Shaft', pp. 331-336, ImechE part D, 1979
- Burrows, C. R., Sahinkaya, M., and Clements, S., 'Electro-magnetic Control of Oil Film Supported Rotor using Ssparse Measurements,' pp. 127-132, Rotating Dynamics, ASME Publication, 1987
- Allaire, P. E., Humphris, R., Kasarda, M., and Koolman, M.I., 'Magnetic Bearing and Damper Effects on Unbalance Response of Flexible Rotors,' pp. 10-14, Proc. AIAA Conference, PA, 1987
- Kasarda, M., Allaire, P. E., Humphris, R., and Barrett, L. E., 'A Magnetic Damper for First Mode Vibration Redution in Multi-mass Flexible Rotors,' Workshop on Rotor Dynamic Problems in High-performance Turbo-machinery, Texas A&M University, 1988
- Salm, J. R., 'Active Electromagnetic Suspension of an Elastic Rotor: Modeling, Control, and Experimental Results,' Journal of Vibration, Acoustics, Stress, and Reliability in Design, ASME, Vol. 110, pp. 493-501, 1988 https://doi.org/10.1115/1.3269556
- Studer, P. A., 'A Practical Magnetic Bearing,' IEEE Transactions on Magnetics, Vol. 13, No. 5, pp. 1155-1157, 1977 https://doi.org/10.1109/TMAG.1977.1059690
- Kim, D. G. and Kim, K. W., 'The Influence of Assembling Errors on the Performance of the Rotor Supported by Active Magnetics Bearing,' International KSME Journal, Vol. 20, No. 112, pp. 3909-3916, 1996
- Malsen, E. H. and Scott, M. A., 'Magnetic bearing design for a high speed rotor,' ImechE, pp. 358-364, 1988