DOI QR코드

DOI QR Code

압력변화에 따른 Ar/N2및 Kr/N2혼합가스의 절연파괴 특성

Breakdown Characteristics of Ar/N2 and Kr/N2Gas Mixtures with Pressure Variation

  • 이상우 (영남대 대학원 전기공학과 에너지 및 환경전자 연구실 박사) ;
  • 이동인 (영남대 대학원 전기공학과 에너지 및 환경전자 연구실 박사) ;
  • 이광식 (영남대 대학원 전기공학과 에너지 및 환경전자 연구실 박사) ;
  • 김인식 (영남대 대학원 전기공학과 에너지 및 환경전자 연구실 박사) ;
  • 김이국 (영남대 대학원 전기공학과 에너지 및 환경전자 연구실 박사) ;
  • 배영호 (영남대 대학원 전기공학과 에너지 및 환경전자 연구실 박사)
  • 발행 : 2002.01.01

초록

본 연구는 방전쳄버내에 각종 가스의 압력(58.8-137.3[kPa]) 변화에 따른 순수가스인 Kr, Ar 및 $N_2$가스의 절연 특성을 조사하고, 혼합가스인 Ar/$N_2$및 Kr/$N_2$가스의 절연 특성과 비교하였다. 또한, 실용 백열전구내의 혼합가스에 위한 각종 특성을 조사하였다. 실험 결과, $N_2$가스의 압력변화에 따른 절연 특성은 큰 분자량을 가진 Kr 및 Ar가스에 비하여 증가되었으며, 가스의 압력이 증가됨에 따라 절인파괴전압은 증가되었다. Ar/$N_2$및 Kr/$N_2$가스의 절연파괴전압은 $N_2$가스의 혼합비가 적을수록 감소되었으며, Kr(70%)$N_2$(30%)가스의 코로나개시전압은 Ar(70%)/$N_2$(30%)가스에 비해 증가되었다. 일반 백열전구에 Ar(70%)/$N_2$(30%)가스인 경우에 비해, Kr(70%)/$N_2$(30%)가스에서 광속과 수명이 대략 94[lm] 및 380[hr]으로 증가되었다. 백열전구내의 냉각온도가 20[$^{\circ}C$]일 때 혼합가스 주입압력은 40[$^{\circ}C$])에 비해 대략 13[%] 증가되었다.

In this paper, breakdown characteristics of pure Kr, Ar and $N_2$gas with gas pressure range were investigated, and the measured values were compared with those in Ar/$N_2$and Kr/$N_2$gas mixtures with pressure varying. Also, various characteristics with gas mixtures in practical incandescent lamps were investigated. Summarizing the experimental results, the breakdown voltages of $N_2$gas were increased than those of Kr and Ar gas with large molecular weight, and the breakdown voltage increased with gas pressure increasing. The breakdown voltages of Ar/$N_2$and Ar/$N_2$gas mixtures were decreased with decreasing the mixtures ratio of $N_2$gas, and corona inception voltage of Kr/$N_2$gas mixtures under non-uniform fields were increased than those of Ar/$N_2$gas mixtures. In case of tactical incandescent lamps, luminous and lifetime of Kr(70%)/$N_2$(30%) gas mixtures were increased about 94[lm] and 380[hr] than those of Ar(70%)/$N_2$(30%) gas mixtures. and injection pressure of gas mixtures with cooling temperature of 20[$^{\circ}C$] in incandescent lamps were increased about 13[%] than those with cooling temperature of 40[$^{\circ}C$].

키워드

참고문헌

  1. Akihiro Kamiya, “Incandescent Lamps" J. Illum. Engng. Inst. Jpn., Vol. 80, No. 8B, pp. 586-587, 1996.
  2. 이상우, 이동인, 이광식, 김인식, 김이국, 배영호, “압력 변화에 따른 $Ar/N_{2}$$Kr/N_{2}$ 혼합가스의 절연파괴 특성”, 한국조명․전기설비학회, 2001년도 학술대회논문집, pp. 1744-1746, 2001.11.1.
  3. W. E. Thouret, R. Kaufman and J. W. Orlando, "Energy and cost saving Krypton filled incandescent lamps", Journal of IES Tran. pp. 188-197, 1975.
  4. I. Amdur and E. A. Mason, "Properties of Gases at Very High Temperatures", The Physics of Fluids, Vol. 1, No. 5, pp. 370-383, 1958. https://doi.org/10.1063/1.1724353
  5. Richard H. Clapp, "Thermionic Emission in gas-filled incandescent lamps", Illuminating Engineering, pp. 357-362, 1950.
  6. R. C. Koo, L. J. Parascandola and J. Shurgan "Pressure Effects of the Fill Gas on the Filament Life of an Incandescent Lamp", Journal of IES Tran., pp. 317-322, 1974.
  7. G. Bergmann and P. Gerthsen, "Electrical breakdown in gas-filled incandescent lamps", Lighting Research and Technology, Vol. 4, No. 3, pp. 159-165, 1972. https://doi.org/10.1177/096032717200400305