참고문헌
- 윤봉기, 1992, '고온 사용설비 파손방지 기술개발,' 과학기술처 보고서, KRISS-92-88-IR
- 한상인, 정세희, 윤기봉, 1997, '입계부식법에 의한 사용중인 화력발전소 요소의 잔여수명 평가,' 대한기계학회논문집 A, 제21권, 1호, pp. 22-31
- 김효진, 정용근, 박종진, 2000, '발전소 고온부의 수명 평가를 위한 소형 시편용 크리프 시험기의 개발,' 대한기계학회논문집 A, 제24권, 10호, pp. 2597-2602
- 박태규, 윤기봉, 2000, '소형펀치 크리프 시험에 대한 수치해석 및 실험연구(I), 대한기계학회 2000년도 제2회 재료 및 파괴부문 학술대회 논문집, pp. 178-183
-
Parker, J. D. and James, J. D., 1994, 'Disc-Bend Creep Deformation Behavior of
$^1/_2Cr^1/_2Mo^1/_4V$ Low Alloy Steel,' Fifth International Conference on Creep and Fracture of Engineering Material and Structures, pp. 651-660 - Parker, J. D. and James, J. D., 1994, 'Creep Behavior of Miniature Disc Specimens of Low Alloy Steel,' ASME PVP, Vol. 279 Developments in a Progressing Technology pp. 167-172
- Ule, B., Sustar, T., Dobes, F. and Milicka, F., 1997, 'Small Punch Test Method Assessment for the Determination of the Residual Creep Life of Service Exposed Components: Outcomes from an Interlaboratory Exercise,' Intelligent Software System in Inspection and Life Management of Power and Process Plants, p. 263-276
- Tettamanti, S. and Crudeli, R., 1998, 'Small Punch Creep Test : A Promising Methodology for High Temperature Plant Components Life Evaluation,' BALTICA Ⅵ Plant Maintenance for Managing Life & Performance, vol. 2, pp. 501-509
- Parker, J. D. and Stratford, G. C., 1998, 'The Application of Miniature Disc Testing for the Assessment of Creep Damage in CrMoV Rotor Steel,' BALTICA Ⅵ Plant Maintenance for Managing Life & Performance, Vol. 2, pp. 477-488
- Ule, B., Sustar, T., Dobes, F. and Milicka, F., 1999, 'Small Punch Test Method Assessment for the Determination of the Residual Creep Life of Service Exposed Components,' Technology, Law and Insurance, Vol. 4, pp. 283-293 https://doi.org/10.1080/135993799349036
- Li, W. and Rodgers, B., 1999, 'A Finite Element and Experimental Study of Punch and Bulge Testing,' Key Engineering Materials, Vol. 167-168, pp. 55-63 https://doi.org/10.4028/www.scientific.net/KEM.167-168.55
- Brookfield, D. J., Li, W. and Rodgers, B., 1999, 'Material Properties from Small Specimens Using the Punch and Bulge Test,' Journal of Strain Analysis, Vol. 34, No. 6, pp. 423-435 https://doi.org/10.1243/0309324991513867
- Dobes, F., Milicka, K., 2000, 'Comparision of Creep Proerties of Power Plant Pipe Bends after Long Term Exposure,' 26th MPA-Seminar, pp. 24.1-24.10
- 권진오, 윤기봉, 이해무, 200, '0.5Cr-0.5Mo-0.25V 주조강의 크래프-피로 균열성장 거동 모델링,' 대한금속재료학회지, 제38권, 2호, pp. 285-291
피인용 문헌
- A Direct Methodology for Small Punch Creep Test vol.56, pp.3, 2016, https://doi.org/10.1007/s11340-015-0108-z