참고문헌
- Sparrow, E. M. and Ortiz, M. C., 1982, 'Heat Transfer Coefficients for the Upstream Face of a Perforated Plate Positioned Normal to an Oncoming Flow,'' Int. J. of Heat and Mass Transfer, Vol. 25, No. I, pp. 127 -135. https://doi.org/10.1016/0017-9310(82)90241-1
- Cho, H. H. and Goldstein, R. J., 1996, 'Effect of Hole Arrangements on ImpingementJEffusion Cooling,' Proceedings of the 3rd KSME-JSME Thermal Engineering Conference, pp. 71-76
- Andrews, G. E. and Nazari, A., 1999, 'Impingement/Effusion Cooling : Influence of the Number of Holes on the Cooling Effectiveness for an Impingement XID of 10.5 and Effusion XID of 7.0,'' Proceedings of the International Gas Turbine Congress, Kobe, Japan, pp. 639-646
- Cho, H. H. and Rhee, D. H., 2000, 'Local HeatlMass Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling System.?' ASME J. of Turbomachinery, Vol. 123, pp. 601-608 https://doi.org/10.1115/1.1344904
- Cho, H. H. and Goldstein, R. J., 1997, 'Total Coverage Discrete Hole Wall Cooling.':' ASME J. of Turbomachinery, Vol. 119, No.2, pp. 320-329 https://doi.org/10.1115/1.2841115
- Cho, H. H. and Goldstein, R. J., 1995, 'Heat (Mass) Transfer and Film Cooling Effectiveness with Injection through Discrete Holes - Part I: within holes and on the back surface;' ASME J. of Turbomachinery, Vol. 117, pp. 440 -450 https://doi.org/10.1115/1.2835680
- 이동호, 김병기, 조형희, '분사각도변화에 따른 단일 막냉각홀 주위에서의 열/물질전달 및 막냉각 효율특성,' 1998, 대한기계학회 논문집(B) 제22권 제10호, pp.1434-1445
- Ambrose, D., Lawrenson, I. J. and Sparke, C. H. S., 1975, 'The Vapor Pressure of Naphthalene,' J. Chem. Thermo.,' Vol. 7, pp. 1173-1176 https://doi.org/10.1016/0021-9614(75)90038-5
- Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Eckert E. R. G., 1976, Analogies to Heat Transfer Processes, in Measurements in Heat Transfer, ed. Eckert, E. R. G. and Goldstein, R. J. pp. 397-423
- Kline, S. J. and McClintock, F., 1953, 'Describing Uncertainty in Single Sample Experiments,'' Mech. Engineering, Vol. 75, pp. 38
- Cho, H. H., Lee, C. H. and Kim, Y. S., 1997, 'Characteristics of Heat Transfer in Impingement Jets by Control of Vortex Pairing,' ASME paper No. 97-GT-276.
피인용 문헌
- Torque control of a vehicle with electronic throttle control using an input shaping method vol.14, pp.2, 2013, https://doi.org/10.1007/s12239-013-0021-3
- Study for Effect of Changes in Thermal Properties on Cooling Process in Running Hot Steel Strip After Hot Rolling vol.37, pp.5, 2013, https://doi.org/10.3795/KSME-B.2013.37.5.459