참고문헌
- Burmeister, L. C., 1979, 'Triangular Fin Performance by the Heat Balance Integral Method,' ASME J. Heat Trans., Vol. 101, pp. 562 - 564 https://doi.org/10.1115/1.3451031
- Prasad, B. S. V., 1996, 'Fin Efficiency and Mechanisms of Heat Exchange through Fins in Multi-Stream Plate-Fin Heat Exchangers: Formulation,' Int. j. Heat Mass Transfer, Vol. 39, No.2, pp. 419-428 https://doi.org/10.1016/0017-9310(95)00125-S
- Campo, A. and Eugenestuffle, R., 1997, 'Symbolic Mathematics for the Calculation of Thermal Efficiencies and Tip Temperatures in Annular Fins of Uniform Thickness,' Int. J Heat Mass Transfer, Vol. 40, No.2, pp. 490-492 https://doi.org/10.1016/0017-9310(96)00093-2
- Ullmann, A. and Kalman, H., 1989, 'Efficiency and Optimized Dimensions of Annular Fins of Different Cross-Section Shapes,' Int. J. Heat Mass Transfer, Vol. 32, pp. 1105-1110 https://doi.org/10.1016/0017-9310(89)90010-0
- Kuan, D. Y, Aris, R. and Davis, H. T., 1984, 'Estimation of Fin Efficiencies of Regular Tubes Arrayed in Circumferential Fins,' Int. J Heat Mass Transfer, Vol. 27, No.1, pp. 148-151 https://doi.org/10.1016/0017-9310(84)90249-7
- Stachiewicz, J. W., 1969, 'Effect of Variation of Local Film Coefficients on Fin Performance,' ASME J. Heat Transfer, Vol. 91, pp. 21 - 26 https://doi.org/10.1115/1.3580114
- 강형석, 윤세창, 이성주, 2001, '사각 휜에 대한 성능해석,' 대한기계학회논문집(B), 제 25권, 제 1호, pp. 1-8
- Unal, H. C, 1988, 'The ffect of the Boundary Condition at a Fin Tip on the Performance of the Fin with and without Internal Heat Generation,' Int. J Heat Mass Transfer, Vol. 31, No.7, pp. 1483-1496 https://doi.org/10.1016/0017-9310(88)90257-8
- Incropera, F. P. and DeWitt, D. P., 1996, Introduction to Heat Transfer, Wiley, New York, pp. 120 -123
- Kang, H. S., 1997, 'Comparison of Performance of the Various Shapes of Asymmetric Fins,' KSME International Journal, Vol. 11, No.3, pp. 311-318