AN EVALUATION OF WEAR CHARACTERISTICS OF LIGHT-CURED RESTORATIVE COMPOSITES ON ENAMEL SURFACE

광중합형 복합레진과 법랑질간의 마모특성 평가

  • Baik, Byeong-Ju (Department of Pediatric Dentistry and Institute of Oral Bioscience, College of Dentistry, Chonbuk National University) ;
  • Lee, Seung-Young (Department of Pediatric Dentistry and Institute of Oral Bioscience, College of Dentistry, Chonbuk National University) ;
  • Lee, Doo-Cheol (Department of Pediatric Dentistry and Institute of Oral Bioscience, College of Dentistry, Chonbuk National University) ;
  • Kim, Jae-Gon (Department of Pediatric Dentistry and Institute of Oral Bioscience, College of Dentistry, Chonbuk National University)
  • 백병주 (전북대학교 치과대학 소아치과학교실 및 구강생체과학연구소) ;
  • 이승영 (전북대학교 치과대학 소아치과학교실 및 구강생체과학연구소) ;
  • 이두철 (전북대학교 치과대학 소아치과학교실 및 구강생체과학연구소) ;
  • 김재곤 (전북대학교 치과대학 소아치과학교실 및 구강생체과학연구소)
  • Published : 2001.05.31

Abstract

This study was performed to evaluate wear characteristics of light-cured composites when opposed by human enamel. Seven light-cured restorative composites were selected and enamel cusps sectioned from premolars. All samples were stored in distilled water at $37^{\circ}C$ for 10 days. 68.6 N of weight was loaded during the test. The measurements of vertical loss of enamel cusps, weight loss and volume loss of composites, and SEM observations of the polished and abraded surfaces were made after 30,000 cycles. The results obtained were summarized as follows; 1. The highest hardness value of 70.4 was observed in the Spectrum group and the lowest value of 19.8 was observed in the Heliomolar group. Results of Tukey test showed that an overall significant difference was indicated except the Spectrum, Z100 and Clearfil AP-X groups(p<0.05). 2. Enamel showed the good abrasion resistance against the Heliomolar group of microfilled composite and the Palpique Toughwell group containing the submicron hybrid type spherical fillers. 3. The abrasive wear resistance of hybrid composites was improved with the decrease of mean particle size and hybrid of submicron particle fillers. 4. SEM observation of worn surfaces revealed the protrusion, attrition and missing of fillers, cracks developing and delamination in the matrix.

본 연구에서는 최근 치과임상에서 이용되고 있는 7종의 복합레진을 시험재료로 선택한 다음 법랑질과 복합레진 충전재가 대합하는 경우의 마모 양상을 조사하기 위해 광중합형 복합레진과 제2소구치 교두를 핀-디스크 구동 방식의 전동식 마모시험기에 고정한 다음 68.6N의 하중을 가한 상태에서 30,000회전시켜 $1.3{\times}10^3m$의 미끄럼 접촉을 가하였다. 마모도를 평가하기 위해 복합레진의 종류에 따른 제2소구치 교두의 수직고경 변화, 시편의 두께 감소와 체적 손실 및 마모시험 전후의 표면을 주사전자현미경으로 관찰하였고, 표면경도가 마모도에 미치는 영향을 평가하기 위해 누프 경도를 측정한 결과, 다음과 같은 결론을 얻었다. 1. 누프 경도는 Spectrum 군에서 70.4로 가장 높고 Heliomolar 군에서 19.8로 가장 낮은 값을 보였으며, Tukey 다중범위검증법에 의해서 각 군 사이의 통계적 유의성을 검증한 결과, Spectrum 군, Z100 군 및 Clearfil AP-X 군을 제외한 나머지 모든 군들 사이에서 상호간에 통계학적으로 유의한 차이를 보였다(p<0.05). 2. 법랑질의 내마모성은 microfill 형인 Heliomolar 군과 대합하는 경우에 가장 높게 나타났으며, 구치부용에서는 구상의 zirconia silica 미세 입자를 복합화한 micro hybrid 형의 Palpique 군에서 가장 높게 나타났다. 3. 복합레진의 연마성 마모에 대한 저항성은 필러의 평균 입경이 작고 미세 필러를 고밀도로 분산시켜 복합화한 hybrid 형 복합레진에서 높게 나타나는 경향을 보였다. 4. 주사전자현미경 관찰 결과, 마모면에서는 필러의 돌출, 마멸과 탈락 및 기질레진의 미세 균열 진전과 표면층의 박리 등이 관찰되었다.

Keywords