Steel and Composite Structures

  • 제1권4호
  • /
  • Pages.441-458
  • /
  • 2001
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural behavior of partially-restrained semirigid steel connections

  • Campione, G. (Dipartimento di Ingegneria Strutturale e Geotecnica, Universita di Palermo) ;
  • Scibilia, N. (Dipartimento di Ingegneria Strutturale e Geotecnica, Universita di Palermo)
  • 발행 : 2001.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

We analyzed the experimental and theoretical behavior of a particular type of steel joint designed to connect beam to beam and able to transfer both shear forces and bending moments. This joint is characterized by the use of steel plates and bolts enclosed in the width of the beams. The experimental investigation was carried out characterizing the constituent materials and testing in flexure beams constituted by two portions of beams connected in the middle with the joint proposed. Connections having different characteristics in terms of thickness of plates, number and type of bolts were utilized. Flexure tests allow one to determine the loaddeflection curves of the beam tested and the moment-rotation diagrams of the connections, highlighting the strength and the strain capacity of the joints. The proposed analytical model allows one to determine the moment-rotation relationship of the connections, pointing out the influence of the principal geometrical and mechanic characteristics of single constituents on the full properties of the joint.

키워드

참고문헌

  1. AISC (1994), "Load and resistance factor design specification for structural steel building", American Institute of Steel Construction, Inc. Chicago, September.
  2. Astaneh-Asl, A., Mc Mullin, K., M. and Call, S. M. (1993), "Behavior and design of steel single plate shear connections", J. Struct. Eng., ASCE, 119(8), 2421-2432. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:8(2421)
  3. Astaneh-Asl, A. and Nader, M., N. (1991), "Experimental studies and design of steel tee shear connections", J. Struct. Eng., ASCE, 116(10), 2883-2901.
  4. Adany, S., Calado, L. and Dunai, L. (2001), "Experimental study on the cyclic behaviour of bolted end-plate joints", Steel and Composite Structures, 1(1), 33-50. https://doi.org/10.1296/SCS2001.01.01.03
  5. Attiogbe, G. and Morris, G.A (1991), "Moment-rotation functions for steel connections", J. Struct. Eng., ASCE, 117, june, 1703-1718. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:6(1703)
  6. Bernuzzi, C., Zandonini, R. and Zanon, P. (1991), "Rotational behaviour of end plate connections", Costruzioni Metalliche, 2, 74-103.
  7. Campione, G., Scibilia N. and Gaeta, G., (2001), "Comportamento sperimentale di un giunto trave-trave a parziale ripristino di resistenza", (only available in Italian) in printing on Proc. of National Conference "Architettura e acciaio", Venezia, Italy.
  8. Chisal, M., L. (1999), "Modelling M-f curves for standard beam-to column connections", Eng. Struct., 21, 1066-1075. https://doi.org/10.1016/S0141-0296(98)00033-9
  9. De Stefano M., De Luca A. and Astaneh-Asl, A. (1994), "Modelling of cyclic moment-rotation response of double-angle connections", J. Struct. Eng., ASCE, 120(1), 212-229. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:1(212)
  10. Eurocode 3 (1994), Steel Structures. European Committee for Standardization (CEN), ENV1-1.
  11. Faella, C., Piluso, V. and Rizzano, G. (1997) "A new method to design extended end plate connections and semirigid braced frames", J. Constr. Steel Res., 41(1), 61-91 https://doi.org/10.1016/S0143-974X(97)00001-1
  12. Manual of Steel Construction: Load and Resistance Factor Design (LRFD) (1994), 2nd Ed., Am. Inst. of Steel Constr. Chicago, 11.
  13. Mazzolani F.M. and Piluso, V., (1996), Theory and Design of Seismic Resistant Steel Frames, E&FN Spon an imprint on Chapman & Hll, 2-6 Boundary Row, London SE1 8HN, UK.
  14. Tremblay, R., Timler, P., Bruneau, M. and Filiatrault A., (1995), "Performance of steel structures during the 1994 Northridge earthquake", Can. J. Civ. Eng., 22, 338-360. https://doi.org/10.1139/l95-046
  15. Wheeler, A. T., Clarke M. J., Hancock G. J. and Murray, T. M., (1998), "Design model for bolted moment end plate connections jointing rectangular hollow sections", J. Struct. Eng., ASCE, 124(2), 164-173. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(164)