DOI QR코드

DOI QR Code

Seismic design of connections between steel outrigger beams and reinforced concrete walls

  • Deason, Jeremy T. (LJB Engineers) ;
  • Tunc, Gokhan (Cantor Seinuk Group, Inc. (WSP)) ;
  • Shahrooz, Bahram M. (Department of Civil and Environmental Engineering, University of Cincinnati)
  • 발행 : 2001.09.25

초록

Cyclic response of "shear" connections between steel outrigger beams and reinforced concrete core walls is presented in this paper. The connections investigated in this paper consisted of a shear tab welded onto a plate that was connected to the core walls through multiple headed studs. The experimental data from six specimens point to a capacity larger than the design value. However, the mode of failure was through pullout of the embedded plate, or fracture of the weld between the studs and plate. Such brittle modes of failure need to be avoided through proper design. A capacity design method based on dissipating the input energy through yielding and fracture of the shear tab was developed. This approach requires a good understanding of the expected capacity of headed studs under combined gravity shear and cyclic axial load (tension and compression). A model was developed and verified against test results from six specimens. A specimen designed based on the proposed design methodology performed very well, and the connection did not fail until shear tab fractured after extensive yielding. The proposed design method is recommended for design of outrigger beam-wall connections.

키워드

참고문헌

  1. Cook R.A., Klingner, R.E. (1992). "Ductile multiple-anchor steel-to-concrete connections", J. Struct. Div., ASCE, 118(6), 1645-1665. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1645)
  2. Hawkins, N.M., Mitchell, D., and Roeder, C.W. (1980). "Moment resisting connections for mixed construction", Eng. J., AISC, 17(1), 1-10.
  3. LRFD (1994). "Load and resistance factor design - Volume I", American Institute of Steel Construction, Chicago, Illinois.
  4. NEHRP, 1998, Recommended Provisions for Seismic Regulations for New Buildings and Other Structures (FEMA 302) and Commentary (FEMA 303), Building Seismic Safety Council, Washington, D.C.
  5. PCI Design Handbook - Precast and Prestressed Concrete (1999). Precast Concrete Institute, Chicago, IL.
  6. Roeder, C.W. and Hawkins, N.M. (1979). "Connections between steel beams and concrete walls", ASCE Convention and Exposition, Atlanta, 23-25.
  7. Roeder, C.W. and Hawkins, N.M. (1981). "Connections between steel frames and concrete walls", Eng. J., AISC, 18(1), 22-29.
  8. Wang, M. (1979). "The behavior of steel structure to shear wall connections under tension", Masters Thesis, University of Washington, Seattle, Washington.

피인용 문헌

  1. Seismic Design of Hybrid Coupled Wall Systems: State of the Art vol.136, pp.7, 2010, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000186
  2. Additive 2D and 3D performance ratio analysis for steel outrigger alternative design vol.20, pp.5, 2016, https://doi.org/10.12989/scs.2016.20.5.1133