DOI QR코드

DOI QR Code

Investigation of rotational characteristics of column 'PINNED' bases of steel portal frames

  • 발행 : 2001.06.25

초록

Most of the portal frames are designed these days by the application of plastic analysis, with the normal assumption being made that the column bases are pinned. However, the couple produced by the compression action of the inner column flange and the tension in the holding down bolts will inevitably generate some moment resistance and rotational stiffness. Full-scale portal frame tests conducted during a previous research program had suggested that this moment can be as much as 20% of the moment of resistance of the column. The size of this moment of resistance is particularly important for the design of the tensile capacity of the holding down bolts and also the bearing resistance of the foundation. The present research program is aiming at defining this moment of resistance in simple design terms so that it could be included in the design of the frame. The investigation also included the study of the semi-rigid behaviour of the column base/foundation, which, to a certain extent, affects the overall loading capacity and stiffness of the portal frames. A series of column bases with various details were tested and were used to calibrate a finite element model which is able to simulate the action of the holding down bolts, the effect of the concrete foundation and the deformation of the base plate.

키워드

참고문헌

  1. Bresler, B. and Lin, Y.Y. (1959), Design of Steel Structures, John Wiley & sons, N.Y.
  2. Engel, P. (1990), "The testing and analysis of pitched roof portal frames", Ph D Thesis, University of Salford.
  3. Horne, M.R. and Morris, L.J. (1985), Plastic Design of Low-Rise Frames, Constrado Monographs, Collins Professional and Technical Books, U.K.
  4. Liu, T.C.H. (1988), "Theoretical modelling of steel portal frame behaviour", Ph D Thesis, University of Manchester.
  5. Liu, T.C.H. and Morris, L.J. (1991a), "The development of a shear hinge and the effect on connection flexibility", Proc. Of the Asian-Pacific Conf on Computational Mechanics, Hong Kong.
  6. Liu, T.C.H. & Morris, L.J. (1991b), "The effect of connection flexibility on portal frame behaviour", Int Workshop on Connections in Steel Structures, AISC/Eurcom, Pittsburgh.
  7. Morris, L.J. and Plum, D.R. (1995), Structural Steelwork Design to BS5950, Longman Scientific & Technical, 2nd Edition, U.K.
  8. Redwood, R. (1992), "Anchor bolt forces for moment-resisting column bases", Canadian J. Civ. Eng., 19, 178-181 https://doi.org/10.1139/l92-017

피인용 문헌

  1. Assessment of Rotational Stiffness for Metallic Hinged Base Plates under Axial Loads and Moments vol.11, pp.8, 2001, https://doi.org/10.3390/buildings11080368