Steel and Composite Structures

  • 제1권2호
  • /
  • Pages.171-185
  • /
  • 2001
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Axial compressive strength of short steel and composite columns fabricated with high stength steel plate

  • Uy, B. (School of Civil & Environmental Engineering, The University of New South Wales)
  • 발행 : 2001.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The design of tall buildings has recently provided many challenges to structural engineers. One such challenge is to minimise the cross-sectional dimensions of columns to ensure greater floor space in a building is attainable. This has both an economic and aesthetics benefit in buildings, which require structural engineering solutions. The use of high strength steel in tall buildings has the ability to achieve these benefits as the material provides a higher strength to cross-section ratio. However as the strength of the steel is increased the buckling characteristics become more dominant with slenderness limits for both local and global buckling becoming more significant. To arrest the problems associated with buckling of high strength steel, concrete filling and encasement can be utilised as it has the affect of changing the buckling mode, which increases the strength and stiffness of the member. This paper describes an experimental program undertaken for both encased and concrete filled composite columns, which were designed to be stocky in nature and thus fail by strength alone. The columns were designed to consider the strength in axial compression and were fabricated from high strength steel plate. In addition to the encased and concrete filled columns, unencased columns and hollow columns were also fabricated and tested to act as calibration specimens. A model for the axial strength was suggested and this is shown to compare well with the test results. Finally aspects of further research are addressed in this paper which include considering the effects of slender columns which may fail by global instabilities.

키워드

참고문헌

  1. Bergmann, R. and Puthli, R. (2000), "Behaviour of composite columns using high strength steel sections", Proc. of Comp. Constr. IV, Eng. Foundation Conf., May-June, Banff, Alberta.
  2. British Standards Institution. (1994), Eurocode 4, ENV 1994-1-1 1994. Design of composite steel and concrete structures, Part 1.1, General Rules and Rules for Buildings.
  3. Council on Tall Buildings and Urban Habitat. (1993), Structural Systems for Tall Buildings, eds Kowalczyk, R.M., Sinn, R. and Kilmister, M.B., Mc Graw-Hill, New York.
  4. Davie, J.C. (1995) The Sydney Casino Project, Concrete 97, Proc. of the 18th Biennial Conf. of the Concrete Institute of Australia, Adelaide, 651-657.
  5. Frost, R.W. and Schilling, C.G. (1964), "Behavior of hybrid beams subjected to static loads", J. Struct. Div., ASCE, 90(3), 55-88.
  6. Haaijer, G. (1961), "Economy of high strength steel structural members", J. Struct. Divi., ASCE, 87(8), 1-23.
  7. Hagiwara, Y., Kadono, A., Suzuki, T. Kubodera, I. Fukasawa, T. and Tanuma, Y. (1995), "Application of HT780 high strength steel plate to structural member of super high rise building: Part 2 Reliability inspection of the structure", Proc. of the Fifth East Asia - Pacific Conf. on Struct. Eng. and Constr. Build. for the 21st Century, Gold Coast, pp. 2289-2294.
  8. Mochuziki, H., Yamashita, T., Kanaya, K. and Fukasawa, T. (1995), "Application of HT780 high strength steel plate to structural member of super high-rise building: Part 1 Development of high strength steel with heavy gauge and welding process", Proc. of the Fifth East Asia - Pacific Conf. on Struct. Eng. and Constr., Build. for the 21st Century, Gold Coast, 2283-2288.
  9. Rasmussen, K.J.R. and Hancock, G.J. (1992), "Plate slenderness limits for high strength steel sections", J. Constr. Steel Res., 23, 73-96. https://doi.org/10.1016/0143-974X(92)90037-F
  10. Rasmussen, K.J.R. and Hancock, G.J. (1995), "Tests of high strength steel columns", J. Constr. Steel Res., 34, 27-52. https://doi.org/10.1016/0143-974X(95)97296-A
  11. Rosier, G.A. and Croll, J.E. (1987), "High strength quenched and tempered steels in structures", Seminar Papers of Association of Consulting Structural Engineers of New South Wales, Steel in Structures, Sydney.
  12. Standards Australia. (1990), Australian Standard, Steel Structures, AS4100-1990, Sydney, Australia.
  13. Structural Steel Development Group. (1989), "Steel frame for perths biggest project", Structures - Structural Steel Development Group Newsletter, BHP Steel, September, 1-2.
  14. Structural Steel Development Group. (1990), "300 Latrobe street, Melbourne-high strength steel columns", Structures - Structural Steel Development Group Newsletter, BHP Steel, October, 3.
  15. Suzuki, T., Ogawa, T. and Ikarashi, K. (1994), "A study on local buckling behavior of hybrid beams", Thin Wall. Struct., 19(2-4), 337-351. https://doi.org/10.1016/0263-8231(94)90038-8
  16. Uy, B. (1996), "Behaviour and design of high strength steel-concrete filled box columns", Proc. of the Int. Conf. on Advances in Steel Structures, Hong Kong, 455-460.
  17. Uy, B. and Bradford, M.A. (1996), "Elastic local buckling of steel plates in composite steel-concrete members", Eng. Struct., An Int. J., 18(3), 193-200. https://doi.org/10.1016/0141-0296(95)00143-3
  18. Uy, B. (2001), "Strength of short concrete filled high strength steel box columns", J. Constr. Steel Res., An Int. J., 57(2), 113-134. https://doi.org/10.1016/S0143-974X(00)00014-6
  19. Uy, B. and Sloane, R.J. (1998), "Behaviour of high strength steel in composite tee beams", J. Constr. Steel Res., Special Issue: 2nd World Conf. on Steel Constr., 46, (1-3), 203-204, Full paper on CD-ROM.

피인용 문헌

  1. Numerical modelling of concrete-filled steel box columns incorporating high strength materials vol.102, 2014, https://doi.org/10.1016/j.jcsr.2014.07.014
  2. Experimental study on steel tubular columns in-filled with plain and steel fiber reinforced concrete vol.48, pp.6, 2010, https://doi.org/10.1016/j.tws.2010.01.009
  3. Stability and ductility of high performance steel sections with concrete infill vol.64, pp.7-8, 2008, https://doi.org/10.1016/j.jcsr.2008.01.036
  4. Experimental behavior and design method of rectangular concrete-filled tubular columns using Q460 high-strength steel vol.125, 2016, https://doi.org/10.1016/j.conbuildmat.2016.08.057
  5. THE INVESTIGATION OF LOAD CARRYING CAPACITY OF ELASTIC-PLASTIC STRAIN HARDENING BISTEEL I-SECTION BEAMS vol.8, pp.1, 2002, https://doi.org/10.1080/13923730.2002.10531247
  6. Behaviour and design of composite columns incorporating compact high-strength steel plates vol.107, 2015, https://doi.org/10.1016/j.jcsr.2015.01.005
  7. Behavior of rectangular concrete-filled high-strength steel tubular columns with different aspect ratio vol.109, 2016, https://doi.org/10.1016/j.tws.2016.10.005
  8. Rectangular concrete-filled steel tubular beam-columns using high-strength steel: Experiments and design vol.131, 2017, https://doi.org/10.1016/j.jcsr.2016.12.016
  9. High-strength steel–concrete composite columns for buildings vol.156, pp.1, 2003, https://doi.org/10.1680/stbu.2003.156.1.3
  10. Tests of eccentrically loaded L-shaped section steel fibre high strength reinforced concrete and composite columns vol.38, 2012, https://doi.org/10.1016/j.engstruct.2012.01.009
  11. Ultimate resistance behavior of rectangular concrete-filled tubular beam-columns made of high-strength steel vol.133, 2017, https://doi.org/10.1016/j.jcsr.2017.02.024
  12. A review of research on high-strength steel structures vol.171, pp.8, 2018, https://doi.org/10.1680/jstbu.16.00197
  13. Experimental tests on biaxially loaded concrete-encased composite columns vol.8, pp.5, 2001, https://doi.org/10.12989/scs.2008.8.5.423
  14. Experimental study of cyclic behavior of composite vertical shear link in eccentrically braced frames vol.12, pp.1, 2012, https://doi.org/10.12989/scs.2012.12.1.013
  15. Experimental and analytical investigation of high-strength concrete-filled steel tube square columns subjected to flexural loading vol.14, pp.2, 2001, https://doi.org/10.12989/scs.2013.14.2.133
  16. Confinement models for high strength short square and rectangular concrete-filled steel tubular columns vol.22, pp.5, 2001, https://doi.org/10.12989/scs.2016.22.5.937
  17. Behavior of Rectangular-Sectional Steel Tubular Columns Filled with High-Strength Steel Fiber Reinforced Concrete Under Axial Compression vol.12, pp.17, 2001, https://doi.org/10.3390/ma12172716
  18. Experimental and analytical investigation of composite columns made of high strength steel and high strength concrete vol.33, pp.1, 2019, https://doi.org/10.12989/scs.2019.33.1.067
  19. Behaviour of high strength concrete-filled short steel tubes under sustained loading vol.39, pp.2, 2001, https://doi.org/10.12989/scs.2021.39.2.159
  20. Unified Theoretical Model for Axially Loaded Concrete-Filled Steel Tube Stub Columns with Different Cross-Sectional Shapes vol.147, pp.10, 2001, https://doi.org/10.1061/(asce)st.1943-541x.0003150
  21. Numerical analysis of concentrically loaded hexagonal concrete-filled steel tubular short columns incorporating concrete confinement vol.24, pp.15, 2001, https://doi.org/10.1177/13694332211029735
  22. Compression behaviours of concrete-filled Q690 high-strength steel tubular columns at low temperatures vol.187, pp.None, 2021, https://doi.org/10.1016/j.jcsr.2021.106983