DOI QR코드

DOI QR Code

Structural analysis of cracked R.C. members subjected to sustained loads and imposed deformations

  • Mola, F. (Department of Structural Engineering, Politecnico di Milano) ;
  • Gatti, M.C. (Rocksoil Consulting Engineering) ;
  • Meda, G. (INPRO Consulting Engineering)
  • 발행 : 2001.06.25

초록

A structural analysis of cracked R.C. members under instantaneous or sustained loads and imposed displacements is presented. In the first part of the paper the problem of deriving feasible moment-curvature diagrams for a long term analysis of R.C. sections is approached in an exact way by using the Reduced Relaxation Function Method in state I uncracked and the method suggested by CEB in state II cracked. In both states the analysis of the main parameters governing the problem has shown that it is possible to describe the concrete creep behaviour in an approximate way by using the algebraic formulation connected to the Effective Modulus Method. In this way the calculations become quite simple and can be applied in design practice without introducing significant errors. Referring to continuous beams, the structural analysis is then approached in a general way, applying the Force Method and the Principle of Virtual Works. Finally, considering single members, the structural analysis is performed by means of a graphical procedure based on the application of feasible moment-rotation diagrams which allow to easily solve various structural problems and to point out the most interesting aspects of the long term behaviour of cracked R.C. members with rigid or elastically deformable redundant restraints.

키워드

참고문헌

  1. CEB/FIP (1993), Model Code 90 Design Code, Thomas Telford, London.
  2. Chiorino, M.A. et al. (1984), CEB/FIP Manual Structural Effects of Time Dependent Behaviour of Concrete, CEB Bulletin 142-142bis, Georgi, St. Saphorin, CH.
  3. EuroCode n. 2, Design of Concrete Structures, Part 1: General Rules and Rules for Buildings.
  4. Favre, R. et al. CEB/FIP (1983), Manual on Cracking and Deformation, EPFL, Lausanne, CH.
  5. Ghali, A., and Favre, R. (1992), Concrete Structures, Stresses and Deformations, E. & FN Spon, London.
  6. Mc Henry, D. (1943), "A new aspect of creep in concrete and its application to design", Proc., ASTM, No. 43.
  7. Mola, F. (1986), "General analysis of non homogeneous viscoelastic structures and sections", Studi e Ricerche, Italcementi, Bergamo, Italy (in Italian), 8, 119-196.
  8. Mola, F. (1991), "Evaluation of load effect redistribution and transverse displacements in cracked continuous R.C. beams", Proc. of XVI Int. Conf. Our World in Concrete & Structures, Singapore, 155-162.
  9. Mola, F., and Pietra S. (1991), "Linear viscoelastic analysis of composite steel-concrete sections", Studi e Ricerche, Italcementi, Bergamo, Italy, 12, 185-230.
  10. Mola, F., and Gatti, M. (1994), "Structural analysis of cracked R.C. members under instantaneous and sustained loads", Studi e Ricerche., Italcementi, Bergamo, Italy, 15, 31-72.