Abstract
The technique that could collect efficiently the hanji fibrous sludge from wastewater using surfactants was developed. When fibrous sludge of which concentration was about 80mg/L, was floated and collected, the optimum concentration of sodium oleate, the pore size of glass filter and the air flow rate were 10mg/L, $5-10{\mu}m$ and 200mL/min., respectively. The behavior of sodium oleate might be interfered by polyvalent cations such as $Ca^{2+}$. But when the concentration of $Ca^{2+}$ was less than 100mg/L, the interference effect did not appear. And when a typical cationic surfactant, cetyltrimethylammonium bromide(CTAB), was used, the collecting yield was less than that of sodium oleate, and the amount of foam was higher than sodium oleate. When 1mg/L of CTAB was added to the hanji sludge sample contained 1mg/L of $PAMID^{(R)}$, a dispersant, fibrous sludge was effectively coagulated, the flotation time was very short and the collecting yield was above 95%. But in the case, sodium oleate was inefficient.
계면활성제를 이용하여 한지 섬유질 슬러지를 폐수시료로부터 효율적으로 제거하는 방법에 대해 연구하였다. 섬유질 슬러지의 농도가 약 80mg/L 인 실험 시료를 음이온 계면활성제인 sodium oleate를 이용하여 부상시켜 제거하려고 할 때 농도는 10mg/L, 유리필터 구멍크기는 $5-10{\mu}m$, 공기 유속은 200 mL/min이 적당하였다. Sodium oleate는 $Ca^{2+}$ 이온과 같은 다가 양이온에 의해 방해를 받을 수 있는데 $Ca^{2+}$ 이온의 농도가 100mg/L 이하일 경우에는 영향이 없었다. 양이온 계면활성제인 cetyltrimethylammonium bromide(CTAB)를 이용하였을 때는 sodium oleate보다 제거율이 좋지 않았으며, 거품도 비교적 많이 생겼다. 전통한지 제조과정에서 분산제로 사용되는 $PAMID^{(R)}$를 실험 재료에 1mg/L 가한 후 CTAB를 1mg/L 가하더라도 섬유질 슬러지들이 매우 잘 엉겼으며 부상시켰을 때 30초 이내에 95% 이상 제거되었으나 sodium oleate는 효과적이지 못하였다.
