대한전기학회논문지:시스템및제어부문D (The Transactions of the Korean Institute of Electrical Engineers D)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

유도전동기 벡터제어를 위한 Simulink/RTW 기반 실시간 제어시스템 개발

Development of a Simulink/RTW-Based Realtime Control System for an Induction Motor Vector Control

  • 강문호 (선문대 공대 기계.제어공학부)
  • 발행 : 2001.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this research a Simulink/RTW-baed realtime control system was developed for an induction motor vector control. On the Simulink window, the control system is designed in the form of block diagrams, program codes are produced automatically with the RTW(Real Time Workshop), then an DSP c compiler compiles the program codes. With this automatic program producing method rapid prototyping is realized with the least time-consuming manual programming procedures. To show effectiveness of the proposed system designing scheme a DSP-based induction motor vector controller was constructed and implemented.

키워드

참고문헌

  1. Simulink, Dynamic System Simulation for MATLAB, Using Simulink the Math Works Inc., 1998
  2. Simulink, Dynamic System Simulation for MATLAB, Writing S-Functions, the Math Works Inc., 1998
  3. Real-Time Workshop, for Use with Simulink, User's Guide, the Math Works Inc., 1998
  4. TMS320C3X/4X Optimizing C Compiler User's Guide, the Texas Instruments Inc., 1998
  5. 'Introduction to $Intellimode^{TM}$ Intelligent Power Modules', Application note, Powerex, Inc.
  6. P. T. Krein et. al., 'Comparative Analysis of Scalar and Vector Control Method for Induction Motors', IEEE PESC, pp.1139-1145, 1993 https://doi.org/10.1109/PESC.1993.472061
  7. 김남정, 유지윤, 강문호, '공간벡터 변조기법을 이용한 유도전동기 완전 디지털 벡터제어', 대한전기학회논문지, 44권, 11호, pp.1447-1456, 1995
  8. P.Vas, Vector Control of AC Machines, Clarendon Press, Oxford, 1992
  9. W. Leonhard, Control of Electrical Drives, Springer-Verlag, 1991
  10. B. K. Bose, 'Technology Trends in Microcomputer Control of Electrical Machines.', IEEE Trans. on Industrial Electronics, vol.35, no.1, pp.160-177, 1988 https://doi.org/10.1109/41.3080