Properties of ${\beta}$-SIC TiB$_2$ Electroconductive Ceramic Composites Densified by Liquid-Phase Sintering(Ⅱ)

液狀 燒結에 의한 ${\beta}$-SIC TiB$_2$系 導電性 複合體의 特性(Ⅱ)

  • 신용덕 (원광대 전기전자공학부) ;
  • 임승혁 (성균관대 전기전자 및 컴퓨터공학부) ;
  • 송준태 (성균관대 전기전자 및 컴퓨터공학부)
  • Published : 2001.06.01

Abstract

The mechanical and electrical properties of the hot-pressed and annealed ${\beta}-SiC-TiB_2$,/TEX> electroconductive ceramic composites were investigated as function as functions of the liquid forming additives of $Al_2O_3+Y_2O_3$. The result of phase analysis of composites by XRD revealed ${\alpha}$-SiC(6H), $TiB_2$,/TEX>, and YAG($Al_5Y_3O_{12}$) crystal phase. The relative density and the mechanical properties of composites were increased with increasing $Al_2O_3+Y_2O_3$ contents in pressureless annealing method because YAG of reaction between $Al_2O_3$ was increased. The flexural strength showed the highest value of 458.9 MPa for composites added with 4 wt% $Al_2O_3+Y_2O_3$ additives in pressed annealing method at room temperature. Owing to crack deflection, crack bridging, phase transition and YAG of fracture toughness mechanism, the fracture toughness showed 7.1 MPa ${\cdot}\;m^{1/2}$ for composites added with 12 wt% $Al_2O_3+Y_2O_3$ additives in pressureless annealing method at room temperature. The electrical resistivity and the resistance temperature coefficient showed the lowest value of $6.0{\times}10^{-4}\;{\Omega}\;{\cdot}\;cm(25\'^{\circ}C}$ and $3.0{\times}10^{-3}/^{\circ}C$ for composite added with 12 wt% $Al_2O_3+Y_2O_3$ additives in pressureless annealing method at room temperature, respectively. The electrical resistivity of the composites was all positive temperature coefficient resistance(PTCR) in the temperature ranges from 25 $^{\circ}C$ to 700 $^{\circ}C$.

Keywords

References

  1. Seung Jun Lee, Chong Hee Kim, 'Effects of ${alpha}-Sic;versus;{beta}-Sic$ Starting Powders on Microstructure and Fracture Toughness of Sic Sintered with $Al_2O_3-Y_2O_3$ Additives', J. Am. Ceram. Soc. Vol. 77, NO. 6, pp. 1655-1658, 1994 https://doi.org/10.1111/j.1151-2916.1994.tb09771.x
  2. R.A. Alliegro, L.B.Coffin, J.R.Tinklepaugh, 'Pressure-Sintered Silicon Carbide', J. Am. Ceram. Soc., Vol. 39, NO. 11, pp. 386-389, 1956 https://doi.org/10.1111/j.1151-2916.1956.tb15609.x
  3. S.Prochazka and R.M. Scanlan, 'Effect of Boron and Carbon on Sintering SiC', J. Am. Ceram. Soc., Vol. 58, NO. 1-2, pp 72, 1975
  4. Seung-Hyunk Yim, Yong-Deok Shin, Jin-Young Ju, Se-Won Yoon and Joon-Tae Song, 'Properties of ${\beta}-SiC-TiB_2$Composites with $Al_2O-3+Y_2O_3$ additives', Trans. KIEE. Vol. 49 NO. 7, pp. 394-399, 2000
  5. Seung-Hyunk Yim, Yong-Deok Shin, Joon-Tae Song, 'The Properties of ${\beta}-SiC-TiB_2$Electroconductive Ceramic Composites Densified by Liquid-Phase Sintering', Trans. KIEE. Vol. 49 NO. 9, pp. 510-515, 2000
  6. William D. Callister, 'Materials Science and Engineering an Introduction ', Fourth Edition, pp. 513, John Wiley & Sons, Inc. 1996
  7. A.G. Evans and T.R. Wilshaw, 'Quasi-Static Solid Particle Demage in Brittle Solids-1. Observation Analysis and Implication', Acta Metallurgica. Vol. 24, pp. 939-956, 1976 https://doi.org/10.1016/0001-6160(76)90042-0
  8. L.J.Van der Paw 'A Method of Measuring Specific Resistivity and Hall Effect of Discs of Arbitrary Shapes', Philips Research Reports, 13[1], pp. 1-9, 1958
  9. Yong Deok Shin, 'Electric Discharge Machining of Hot-Pressed SiC-$ZrB_2$Composites Ceramic', Trans. KIEE. Vol. 46, NO. 7, pp. 1062-1067, 1997
  10. Patricia A. Hoffman, 'Thermo Elastic Properties of Silicon Carbide-Titanium Diboride Particulate Composites', M. S Thesis, Department of Materials Science and Engineering, The Pennsylvania State University, 1992
  11. Jurgen Rodel, 'Interaction Between Crack Deflection and Crack Bridging', Journal of the European Ceramic Society, 10, pp. 143-150, 1992 https://doi.org/10.1016/0955-2219(92)90027-B