Power Factor with Single Power Stage AC/DC Converter Operated in Active-Clamp Mode

능동 클램프 모드로 동작하는 단일 전력 AC/DC 컨버터에 의한 역률개선

  • Published : 2001.08.01

Abstract

This paper presents the single-stage high power factor AC to DC converter operated in active-clamp mode. The proposed converter is added active-clamping circuit to boost-flyback single-stage power factor corrected power supply. The active-clamping circuit limits voltage spikes, recycles the energy trapped in the leakage inductance, and provides a mechanism for achieving soft switching of the electronic switches to reduce the switching loss. The auxiliary switch of active-clamping circuit uses the same control and driver circuit as the main switch to reduce the additional cost and size. To verify the performance of the proposed converter, a 100W converter has been designed. The proposed converter gives good power factor correction, low line current harmonic distortions, and tight output voltage regulation, as used unity power factor.

Keywords

References

  1. R. redl, L. Balogh and N.O. Solcal, 'A new family of single stage isolated power-factor corrector with fast regulation of the output voltage', in Proc. IEEE PESC'92 Rec, pp1137-144, 1992 https://doi.org/10.1109/PESC.1994.373825
  2. D. Y. Huh. et, 'New group of ZVS PWM converters operable on constant frequency and application to power factor correction circuit', IEEE PESC'92 record, pp1441-1446, 1992 https://doi.org/10.1109/PESC.1992.254744
  3. SMPS 기술 조사 전문위원회, 'SMPS 기술현황,' 대한 전기학회 기술조사보고, pp84-102, 1997
  4. R. Watson, F. C. Lee & G. C. Hua, 'Utilization of active-clamp circuit to achieve soft switch in flyback converters,' Proceedings of the IEEE, pp909-916 https://doi.org/10.1109/PESC.1994.373787
  5. R. Watson, G. C. Hua, and F. C. Lee, 'Characterization of an active clamp flyback topology for power factor correction applications,' Proceedings of th ninth annual applied power electronics conference, pp412-418, 1994 https://doi.org/10.1109/APEC.1994.316369
  6. 백수현, 김용, 이윤종, 한경희, '전력전자', 동일출판사, 1994
  7. 김희준, '스위치 모드 파워 서플라이', 성안당, 1996
  8. 박귀태 외, '인버터 에어컨용 능동 역률개선회로 설계 및 해석', 대한전기학회 논문지 46권 5호, pp 699-704, 1997
  9. Dragan Maksimovic, 'Design of the clamped-current high-power factor boost rectifier,' IEEE Trans. on Ind. Appl. Vol.31, No.5, pp 986-992, 1995 https://doi.org/10.1109/28.464510