無加壓 열처리에 의한 ${\beta}$-SIC-TiB$_2$ 複合體의 製造와 特性

Manufacture and Properties of ${\beta}$-SIC-TiB$_2$ Composites Densified by Pressureless Annealing

  • 신용덕 (원광대 전기전자공학부) ;
  • 주진영 (원광대 전기전자공학부) ;
  • 박미림 (원광대 전기전자공학부)
  • 발행 : 2001.05.01

초록

The effect of $Al_2O_3+Y_2O_3$ additives on fracture toughness of ${\beta}-SiC-TiB_2$ composites by hot-pressed sintering was investigated. The ${\beta}-SiC-TiB_2$ ceramic composites were hot-press sintered and pressureless-annealed by adding 16, 20, 24 wt% ${\beta}-SiC-TiB_2$(6:4 wt%) powder as a liquid forming additives at low temperature(1800 $^{\circ}C$) for 4 h. Phase analysis of composites by XRD revealed mostly of ${\alpha}$-SiC(6H), $TiB_2$, and YAG($Al_5Y_3O_{12}$). The relative density was over 95-88 % of the theoretical density, and the porosity increased with increasing $Al_2O_3+Y_2O_3$ contents because of the increasing tendency of pore formation. The fracture toughness showed the highest value of 5.88 MPa${\cdot}m^{1/2}$ for composites added with 20 wt% $Al_2O_3+Y_2O_3$ additives at room temperature. The electrical resistivity showed the lowest value of $5.22{\times}10^{-4}\;{\Omega}\;{\cdot}\;cm$ for composite added with 20 wt% $Al_2O_3+Y_2O_3$ additives at room temperature, and was all positive temperature coefficeint resistance(PTCR) against temperature up to 900 $^{\circ}C$.

키워드

참고문헌

  1. N. P. Padture, 'In Situ-Toughened Silicon Carbide', J. Am. Ceram. Soc., Vol. 77, No. 2, pp. 519-523, 1994 https://doi.org/10.1111/j.1151-2916.1994.tb07024.x
  2. Seung-Hyunk Yim, Yong-Deok Shin, Jin-Young Ju, Se-Won Yoon and Joon-Tae Song, 'Properties of $\{beta}-SiC-TiB_{2}$ Composites with $Al_{2}O_{3}+Y_{2}O_{3}$ additives', Trans. KIEE. Vol. 49 No. 7, pp. 394-399, 2000
  3. Seung-Hyuk Yim, Yong-Deok Shin, Joon-Tae Song, 'The Properties of ${\beta}-SiC-TiB_{2}$ Electroconductive Ceramic Composites Densified by Liquid-Phase Sintering', Trans. KIEE Vol. 49 C, No. 9, pp. 510-515, 2000
  4. William D. Callister, 'Materials Science and Engineering an Introduction', Fourth Edition, pp. 513, John Wiley & Sons, Inc. 1996
  5. A. G. Evans and T. R. Wilshaw, 'Quasi-Static Solid Particle Demage in Brittle Solids-1. Observation Analysis and Implication', Acta Metallurgica. Vol. 24, pp. 939-956, 1976 https://doi.org/10.1016/0001-6160(76)90042-0
  6. 'Philips Research Reports', Philips Res. Repts 13, 1-9, 1958
  7. Yong Deok Shin, 'Electric Discharge Machining of Hot-Pressed $SiC-ZrB_{2}$ Composites Ceramic', Trans. KIEE. Vol. 46, No. 7, pp. 1062-1067, 1997
  8. Patricia A. Hoffman, 'Thermo Elastic Properties of Silicon Carbide-Titanium Diboride Particulate Composites', M. S Thesis, Department of Materials Science and Engineering, The Pennsylvania State University, 1992