References
- SAE 940188 Characterization of the Transient Spray from High Pressure Swirl Injector W.L.Everse
- MTZ49 v.2 Mechanik der Hochdruckein - Sprizung von Pumpedusen - Systemen K.Egger
- Thesis for the Degree of MS Characterization of the Transient Spray from a High Pressure Injector D.S.Pederson
- SAE 790040 Turbulent Air Flow in the Combustion Bowl of a D. I. Diesel Engine and its Effect on Engine Performance F.Brabdl;I.Reverencic;W.Cartellieri;J.C.Dent
- SAE 861186 Effect of Combustion Geometry on Diesel Combustion T.Saito;Y.Dasiho
- 일본기계학회 논문집(B) v.60 no.577 Low NOx Methanol Diesel Engine with DME Torch Ignition Method J.Guo;T.Chikashisa;T.Mureyame;M.Miyano
- Appl. Mach. Modelling A Contribution to the Design of a Novel Direct - Injection Diesel Engine Combustion System - Analysis of Pip Size K.Park;D.M.Wang;A.P.Watkins
- 한국자동차공학회 춘계학술대회 Optimizing D. I. Diesel Combustion Chamber System Useing New Wall Impaction Model. K.Park;D.M.Wang;A.P.Watkins
- Computers in Reciprocating Engines and Gas Turbines Assessment and Application of a New Spray Wall Impaction Model A.P.Watkins;K.Park
- 대한 기계학회 춘계학술대회 IDI 디젤 분무의 글로우 플러그 충돌효과에 관한 연구 조래희;김덕줄;박권하;이장희;정용일
- SAE 901618 New Type of Diesel Engine by Impingement of Fuel Jet (OSKA - D) S.Kato;S.Onishi
- SAE 911769 Performance of Glow Plug Assisted Direct Injection Methannol Engine by Impingment of Fuel Jet (OSKA - F) S.Kato;S.Onishi
- SAE 921645 Development of Low NOx Emission Diesel by Impingment of Fuel Jet S.Kato;S.Onishi;H.Tanabe;G.T.Sato
- ICLASS-82 no.9.3 Atomization of Multi Fuel Sprays M.M.E.Watkil;O.A.Uyehara;P.S.Myers
- Stratified Charge Automotive Engine Conf. Modelling of Drop Inter Actions in Thick Sprays and a Comparison with Experiment P.J.O'Rourke;F.V.Brocco
- SAE 860469 Effect of Drop Break-up on Fuel Sprays R.D.Reitz;R.Kiwakar
- Int. Conf. on Liquid Atomization and Spraying Systems ICLASS-82 Deformation Bahaviour of a Liquid Droplet Impinging on a Hot Metal surface K.Araki;A.Moriyama
- Proc. R. Soc. Lond-A 280 The Coal Escence and Bouncing of Water Drop at Air/water Interface O.W.Jayaratne;B.T.Mason
- Chamical Engineering Science v.21 The Heat Transfer from a Hot Wall to Impinging Water Drops in the Spheroidal State L.H.J.Wachters;N.A.J.Westerling
- KSME Journal v.10 no.4 The Effect of Non-orthogonal Grids on Spray and Air Flow Predictions K.Park;A.P.Watkins
- International Journal of Heat and Fluid Flow v.17 no.4 Comparison of Wall Spray Impaction Models with Experimental Data on Drop Velocities and Sizes K.Park;A.P.Watkins
- Journal of Auto mobile Engineering v.210 no.D3 An Investigation of Combustion Chamber Shapes for Small Automotive Direct Injection Diesel Engines Employing Spray Impaction K.Park;A.P.Watkins
- Transaction of Computers in Reciprocating Engines and Gas Turbines Assessment and Application of a New Spray Wall Impaction Model K.Park;A.P.Watkins