Abstract
This paper deals with the data processing method relative to reference frames through the calculation of absolute coordinates of permanent GPS site which was established at Sungkyunkwan University. In this paper. we computed the ITRF97 coordinates with high precision (0.0001 ppm) from GPS data analysis. Also, we derived the accurate coordinates referred to WGS84 and Korean Geodetic Datum (KGD) using transformation parameters provided. ITRF97 coordinates were computed by using the GIPSY-OASIS II (GOA II) software and the algorithms for determining the position developed Jet Propulsion Laboratory (JPL). The coordinates referred to WGS84 and KGD were derived from the transformation parameters provided by International Earth Rotation Service (IERS) and National Geography Institute (NGI). The parameters determined by NGI were calculated from the 2000 project of the establishment of geocentric coordinate system. We tested its availability through the comparison of the coordinates obtained from local GPS data analysis.
본 연구는 GPS상시관측소의 기준좌표계별 절대좌표 산정을 위한 적합한 방안의 결정을 위해 수행되었으며, 성균관대학교 구내에 설치된 상시관측소를 연구대상으로 하였다. 본 논문에서 ITRF97성과는 정밀도 0.001ppm의 정밀단독측위기법으로 GPS 데이터를 해석하여 산정하였고. WGS84와 대한민국 좌표계 성과는 결정된 ITRF97성과를 이미 제공되어 있는 파라메터들로 변환하여 산정하였다. ITRF97 성과의 경우 제트추진연구소에서 개발한 위치결정 알고리즘과 GIPSY-OASIS II(이하 GOA II)를 사용하여 산정하였다. WGS84와 대한민국 좌표계 성과는 IERS에서 전 지구적으로 계산한 좌표변환 계수와 2000년도 국립지리원에서 시행한 사업인 한국 지구중심 기준좌표계의 결정 사업을 통해 산정된 좌표변환 계수를 이용하여 산정하였으며, 이를 지역적인 GPS 데이터 해석을 통해 산정된 성과와 비교하여 그 활용성을 검증하였다.