Korea-Australia Rheology Journal

  • 제13권4호
  • /
  • Pages.179-187
  • /
  • 2001
  • /
  • 1226-119X(pISSN)
  • /
  • 2093-7660(eISSN)
한국유변학회 (The Korean Society of Rheology)
권호 표지

Nonlinear dynamics and stability of film casting process

  • Lee, Joo-Sung (Department of Chemical Engineering, Applied Rheology Center Korea University) ;
  • Hyun, Jae-Chun (Department of Chemical Engineering, Applied Rheology Center Korea University)
  • 발행 : 2001.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

As part of continuing efforts to investigate nonlinear dynamics and stability of film casting process, our earlier results obtained by Lee et al. (2001b) have been extended in the present study to cover the film casting of both extension thickening and extension thinning fluids. The same instability mechanism and draw resonance criterion previously derived have been found valid here, and a rather complex dynamic behavior of film width in contrast to that of film thickness has also been confirmed. The effect of fluid viscoelasticity on draw resonance, however, exhibits opposite results depending on whether the fluid is extension thickening or thinning, i.e., it stabilizes film casting in the former while destabilizing in the latter. The encapsulation extrusion method which recently has been successfully employed to stabilize industrially important paper coating process, has been theoretically explained in the present study as to why such stabilization is possible.

키워드

참고문헌

  1. Polymer processing Agassant,J.F.;P.Avenas;J.Ph.Sergent;P.J.Carreau
  2. J. Non-Newtonian Fluid Mech. v.28 Draw resonance in film casting of viscoelastic fluids: a linear stability analysis Anturkar,N.R.;A.Co
  3. AIChE J. v.22 A theory of isothermal melt spinning and draw resonance Fisher,R.J.;M.M.Denn
  4. Proc. of ANTEC 2001 The use of encapsulation dies for processing linear polyolefin resins in extrusion coating Frey,K.R.;G.K.Jerdee;C.D.Cleaver
  5. Korea-Australia Rheology J. v.11 Draw resonance in polymer processing: a short chronology and a new approach Hyun,J.C.
  6. Proc. of Australian-Korean Rheology Conference 2001 Theoretical explanation of process stability enhancement by the encapsulation extrusion coating method Hyun,J.C.;J.S.Lee
  7. Chem. Eng. Sci. v.51 Film casting of a modified Giesekus fluid: stability analysis Iyengar,V.R.;A.Co
  8. Korean J. Chem. Eng. v.16 Stability of isothermal spinning of viscoelastiv fluid Jung,H.W.;J.C.Hyun
  9. AIChE J. v.45 An approximate method for determining the statility of film-casting process Jung,H.W.;S.M.Choi;J.C.Hyun
  10. AIChE J. v.46 Draw resonance and kinematic waves in viscoelastic isothermal spinning Jung,H.W.;H.S.Song;J.C.Hyun
  11. Film processing Kanai,T.;G.A.Campbell
  12. J. Rheol. v.31 Comparison of simple constitutive equations for polymer melt in shear and biaxial and uniaxial extensions Khan,S.A.;R.G.Larson
  13. AIChE J. v.42 Kinematic waves in the isothermal melt spinning of Newtonian fluids Kim,B.M.;J.C.Hyun;J.S.Oh;S.J.Lee
  14. J. Non-Newtonian Fluid Mech. v.99 Effcet of fluid viscoelasticity on the draw resonance dynamics of melt spinning Lee,J.S.;H.W.Jung;S.H.Kim;J.C.Hyun
  15. J. Non-Newtonian Fluid Mech. v.101 Kinematic waves and draw resonance in film casting process Lee,J.S.;H.W.Jung;H.S.Song;K.Y.Lee;J.C.Hyun
  16. Korean J. Chem. Eng. v.12 Dichotomous behavior of polymer melts in isothermal melt spinning Lee,S.;B.M.Kim:J.C.Hyun
  17. Plast. Eng. v.41 Reducing draw resonance in LLDPE film resins Luchesi,P.J.;E.H.Roberts;S.J.Kurtz
  18. I&EC Fund. v.8 Spinning a molten threadline: stability Pearson,J.R.A.;M.A.Matovich
  19. J. Non-Newtonian Fluid Mech. v.2 A new constitutive equation derived from network theory Phan­Thien,N.;R.I.Tanner
  20. J. Rheol. v.22 A nonlinear network viscoelastic model Phan­Thien,N.
  21. Polym. Eng. Sci. v.36 Study of the stability of the film casting procces Silagy,D.;Y.Demay;J.F.Agassant
  22. J. Non-Newtonian Fluid Mech. v.89 Stability of a two-layer blown film coextrusion Yoon,K.S.;C.W.Park