이관능성 에폭시/폴리썰폰 블렌드의 경화 동력학 및 유변학적 특성에 관한 연구

Studies on Cure Kinetics and Rheological Properties of Difunctional Epoxy/Polysulfone Blend System

  • 박수진 (한국화학연구소 화학소재연구부) ;
  • 김현철 (한국화학연구소 화학소재연구부) ;
  • 이재락 (한국화학연구소 화학소재연구부)
  • 발행 : 2001.03.01

초록

본 연구에서는 이관능성 에폭시인 diglycidylether of bisphenol A (DGEBA)/polysulfone (PSF) 블렌드를 시차 열분석기와 레오미터를 이용하여 경화 동력학과 유변학적 특성에 대해 연구하였다. DSC 측정 결과, 최대 발열 피크와 half-width 방법을 사용하여 구한 경화 활성화 에너지 (E$_{a}$ )는 PSF의 함량이 30wt%까지는 증가하였으나, 그 이상의 첨가에서는 감소하였다. 그리고, 전화량($\alpha$)과 전환 속도(d$\alpha$/dt)는 PSF의 함량이 증가함에 따라 감소함을 보였다. 본 연구에서의 유변학적 특성은 레오미터를 이용하여 등온 조건하에서 검토하였고, 겔화 시간과 경화 온도를 이용한 Arrhenius 방정식을 적용하여 가교 활성화 에너지 (E$_{c}$)를 검토한 결과, E$_{a}$ 와 유사한 경향을 나타내었다. 이는 높은 점도를 지닌 PSF의 첨가로 인한 DGEBA와 PSF의 상분리 현상 때문이라 사료된다.다.

In this work, the cure kinetics and rheological properties of difunctional epoxy(diglycidylether of bisphenol A, DGEBA)/polysulfone (PSF) blends were investigated using differential scanning calorimeter and rheometer. From the DSC results of the blends, the temperature of the exothermic peak and cure activation energy (E) using a half-width method were increased with increasing the PSF content to neat epoxy resin up to 30 wt%. However, a marginal decrease in the blend system was shown in E. The conversion ($\alpha$) and conversion rate (d$\alpha$/dt) were decreased as the content of PSF increases. Rheological properties of the blend system were investigated under isothermal condition using a rheometer. Cross-linking activation energy (E$_{c}$) was determined from the Arrhenius equation based on gel time and curing temperature. As a result, the E$_{c}$ showed a similar behavior with E which could be resulted from high viscosity of PSF and the phase separation between DGEBA and PSF.PSF.f PSF and the phase separation between DGEBA and PSF.PSF.

키워드

참고문헌

  1. Epoxy Resin J. Delmonte;J. T. Hoggatt;C. A. May
  2. J. Appl. Polym. Sci. v.29 J. Mijovic;J. Kim;J. Slaby
  3. ACS Advances in Chemistry Series No. 114 Epoxy Resin Chemistry R. S. Bauer
  4. Epoxy Resin C. A. May
  5. Disigning with Plastics and Composites S. V. Rosato;D. P. Dimattia;D. V. Rosato
  6. Polym. Eng. Sci. S. J. Park;G. H. Kwak;S. Masao;J. R. Lee
  7. J. Appl. Polym. Sci. v.42 D. Verchere;J. P.Pascault;H. Satereau;S. M. Moschiar;C. C. Riccardi;J. J. Williams
  8. Polymer v.38 P.Haung;S. Zheng;J. Haung;Q. Guo
  9. Polym. Eng. Sci. v.34 E.M. Woo;L. D. Bravenec;J. C. Seferis
  10. J. Polym. Sci., Polym. Phys. Ed. v.26 R. S. Raghava
  11. Eur. Polym. J. v.31 M. C. Chem;D. J. Hourston;W. B. Sun
  12. Polym. Mater. Sci. Eng. v.63 A. F. Yee;R. A. Person
  13. Polymer v.40 W. D. Cook;M. Mehrabi;G. H. Edward
  14. Viscoelastic Properties of Polymers J. D. Ferry
  15. J.Polym. Sci. Polym. Phys. v.38 S. J. Park;T. J. Kim;J. R. Lee
  16. J. Appl. Polym. Sci. v.11 K. E. Barrett
  17. Bull. Chem. Soc. Jpn. v.38 T. Ozawa
  18. J. Res. Nat. Bureau. Stand v.57 H. E. Kissinger
  19. J. Polym. Eng. v.16 T.Ojeda;S.Liberman;R. Amorim;D. Samios
  20. Polymer v.38 M. I. G. de Miranda;C. Tomedi;C. I. D. Bica;D. Samios
  21. Polym. Eng. Sci. v.27 H. H. Winter
  22. Anal. Chem. v.60 D. N. Waters;L. P. John
  23. J. Polym. Sci. Polym. Phys v.35 R. J. Varley;J. H. Hodgkin;D. G. Hawthorne;G. P. Simon
  24. J. Polym. Sci. Polym. Phys v.33 J. O. Simpson;S. A. Bidstrup
  25. J. Polym. Sci. Polym. Chem. v.38 S. J. Park;M. K. Seo;J. R. Lee
  26. J. Appl. Polym. Sci. v.47 P.A. Oyanguren;R. J. Williams