The Development using Fuzzy Control of sludge amount inspection and discharge materials of outlet water and affiliated water-purification tank

퍼지제어를 통한 오수-합병정화조의 오니 측정 및 제어시스템에 관한 연구

  • 박주식 (명지대학교 산업공학과) ;
  • 박윤규 (명지대학교 산업공학과) ;
  • 강경식 (명지대학교 산업공학과)
  • Published : 2001.12.01

Abstract

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which are the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxyzen demanding amount has to control. Each room mus be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

Keywords