Korea-Australia Rheology Journal

  • 제13권2호
  • /
  • Pages.83-87
  • /
  • 2001
  • /
  • 1226-119X(pISSN)
  • /
  • 2093-7660(eISSN)
한국유변학회 (The Korean Society of Rheology)
권호 표지

The morphology and mechanical properties of the blends of syndiotactic polystyrene and polystyrene-block-poly(ethylene-co-butylene)-block-polystyrene copolymers

  • O, Hyun-Tack (Department of Chemical Engineering and Polymer Research Institute, Electronic and Computer Engineering Division, Pohang University of Science and Technology) ;
  • Kim, Hwang-Ryong (Department of Chemical Engineering and Polymer Research Institute, Electronic and Computer Engineering Division, Pohang University of Science and Technology) ;
  • Kim, Jin-Kon (Department of Chemical Engineering and Polymer Research Institute, Electronic and Computer Engineering Division, Pohang University of Science and Technology) ;
  • Park, Joon-Young (Polymer Material Lab, Chemical Sector, Samsung Advanced Institute of Technology)
  • 발행 : 2001.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The morphology and mechanical properties of the blends of a syndiotactic polystyrene (SPS) and poly-styrene-block-poly(ethylene-co-butylene)-block-polystyrene copolymers (SEBS) with various polystyrene block contents are studied. Mechanical properties, especially elongation at break and impact strength (IS), of the blend depend upon the morphology and interfacial adhesion, which in rum are affected by the viscosity ratio of constituent components and the styrene block content in SEBS. The IS of a blend was affected by the combined effect of rubber content and the interfacial adhesion. A maximum IS was found for a blend with the weight fraction of the PS block in an SEBS of 0.18. The IS of blends with smaller weight fractions of the PS block exhibited lower due to poor interfacial adhesion between SPS/SEBS in spite of a larger amount of rubber block. On the other hand, the IS of blends with larger weight fraction of the PS block becomes smaller due to lower amounts of rubber block in spite of better interfacial adhesion.

키워드

참고문헌

  1. Acta Polym. v.49 Compatibility of syndiotactic with atactic polystyrene Bonnet, M.;M. Buhk;G. Trogner;K. D. Rogausch;J. Petermann
  2. Polymer v.30 Impact behaviour of nylon-rubber blends : 6. Influence of structure on voiding processes: toughening mechanism Borggreve, R. J.;R. J. Gaymans;H. M. Eichenwald
  3. Toughened Plastics Bucknall, C.B.
  4. Macromolecules v.26 Effects of a diblock copolymer on adhesion between immiscible polymers. 2. PS-PMMA copolymer between PPO and PMMA Char, K.;H. R. Brown;V. R. Deline
  5. Macromolecules v.30 Morphology-interface-property relationships in polystyrene/ethylene-propylene rubber blends 1. Influence of triblock copolymer interfacial modifiers Cigana, P.;B. D. Favis;C. Albert;T. Vu-Khanh
  6. Polymer v.32 Syndiotactic polystyrene, crystallization and melting behavior Cimmino, S.;E. Di Pace;E. Martuscelli;C. Selvestre
  7. Macromol Chem. Phys. v.198 Miscibility behavior of syndiotactic and atactic polystyrene Ermer, H.;R. Thomann;J. Kressler;R. Brenn;J. Wunsch
  8. Polymer v.39 Miscibility of syndiotactic polystyrene/atactic polystyrene blends by crystallization kinetics and enthalpy relaxation Hong, B. K.;W. H. Jo;J. Kim
  9. Polymer v.41 Effects of molecular weight of SEBS triblock copolymer on the morphology, impact strength, and rheological property of syndiotactic polystyrene/ethylenepropylene rubber blends Hong, B. K.;W. H. Jo
  10. Macromolecules v.21 Crystalline syndiotactic polystyrene Ishihara, N.;T. Seimiya;M. Kuramoto;M. Uoi
  11. Macromolecules v.32 Lattice disordering and domain dissolution transitions of a highly asymmetric polystyrene-block-poly(ethylene-co-but-1-ene)-block-polystyrene copolymer Kim, J. K.;H. H. Lee;S. Sakurai;S. Aida;J. Masamoto;S. Nomura;Y. Kitagawa;Y. Suda
  12. Unpublished research data Kim, J. K.;H. H. Lee;W. Y. Jeong
  13. Fracture Behaviour of Polymers Kinloch, A.J.;R. J. Young
  14. J. Mater. Sci. v.28 Dilatational bands in rubber-toughened polymers Lazzeri, A.;C. B. Bucknall
  15. Polymer v.36 Interfacial modification of polymer blends the emulsification curve: 1. Influence of molecular weight and chemical composition of the interfacial modifier Matos, M.;B. D. Favis;R. Jerome
  16. MS thesis, Pohang University of Science and Technology O. H. T.
  17. Polymer v.33 Rubber toughening of polyamides with functionalized block copolymers : 1. Nylon-6 Oshinski, A.J.;H. Keskkula;D. R. Paul
  18. Polymer Blends and Alloys Shonaike, G. O.;G. P. Simon