소성∙가공 (Transactions of Materials Processing)

  • 제10권7호
  • /
  • Pages.534-542
  • /
  • 2001
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지

유한요소법을 이용한 자동차 로어암의 액압성형 해석

Analysis of Hydroforming Process for an Automobile Lower Arm by FEM

  • 김정 (부산대학교 항공우주공학과 대학원) ;
  • 장유철 (부산대학교 항공우주공학과 대학원) ;
  • 강성종 (대구가톨릭대학교 기계자동차공학부) ;
  • 강범수 (부산대학교 항공우주공학과)
  • 발행 : 2001.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Tubular hydroforming has attracted increased attention in the automotive industry recently. In this study, a professional finite element program for analysis and design of tube hydroforming processes, has been developed, called HydroFORM-3D, which is based on a rigid-plastic model. With the developed program HydroFORM-3D, the hydroforming process for an automobile lower arm is analyzed and designed. The manufacturing process for a lower arm consists of tube bending, preforming, and final hydroforming. To accomplish successful hydroforming process design, thorough investigation on proper combination of process parameters such as internal hydraulic pressure, axial feeding, and tool geometry is required. This paper describes the influences of forming conditions on the hydroforming of a lower arm by using simulation to predict strain and tube shape during bending, preforming, and final hydroforming processes.

키워드

참고문헌

  1. J. of Mat. Proc. Technol. v.71 Tube hydroforming Research and Practical Application Dohmann, F.;Harli C.
  2. Annals of CIRP v.48 no.2 Metal Forming of Tubes and Sheet with Liquid and Other Flexible Media Schmoeckel, D.;Hielscher, C.
  3. 한국소성가공학회지 v.9 no.6 자동차용 범퍼레일의 하이드로포밍 기술 연구 손성만;이문용;이상용
  4. Innovations in Tube Hydroforming Technology International Conference Optimization of Process and Tool Development for Hydroforming Liu, J.;Hann, D.
  5. Int J. for Numerical Methods in Engineerng v.30 Three-Dimensional Finite Element Contact Algorithm for Metal Forming Manuel, M.;Martins, P.
  6. Meetal Forming and the Finite Element Method Kobayahsi, S.;Oh. S.I.;Altan, T.
  7. Trans ASME. J. Eng. Ind v.9 no.5 New Solutiios to Rigid Plastic Deformation Problems Using a Matrix Method Chen, C. C.;Kobayashi, S.
  8. Int. J. of Mach-ine Tools & Manufacture v.40 Analysis and Design of Hydroforming Process for Automo-bile Rear Axle Housing by FEM Lei, L. P.;Kim, J.;Kang, B. S.
  9. Proc. of AFDM99, Pusan Korea Tube Bending Technology of Hydroforming Process for an Automotive Part Yang, J. B.;Jeon, B. H.;Oh, S. I.
  10. International Manufacturing Confe-rence in China Preform Design in Hydroforming of Automobile Lower Arm by FEM Kim, J.;Lei, L. P.;Kang, B. S.