Abstract
The purpose of this experimental study was to investigate the material properties of concrete surface preparator with inorganic composite, which was modified with plaster and admixture. A series of experiment were conducted to appraise the properties according to KS F 4716. The experimental results were as follows ; When the concrete surface preparator with inorganic composite was used, the hair crack and split, due to early drying shrinkage, was little. So it is superior to concrete surface preparator with cement paste plaster The bonding strength of concrete surface preparator with inorganic composite increased about 60% compared to that of concrete surface preparator with cement paste plaster. The workability of surface flatness and finishing was superior compared to that of existing concrete surface preparator. All specifications on concrete surface preparator were satisfied in the series of this experiments. Therefore, the concrete surface preparator with inorganic composite might be satisfactory applied in field due to its superior material properties.
본 연구는 콘크리트 면처리재 (Concrete Surface Preparator)와 기존의 견출공법에서 사용한 플라스터의 재료적 특성을 비교검토함으로써 콘크리트 면처리재의 사용가능성 및 품질특성을 규명하고자 하였다. 이를 위하여 실험은 콘크리트 면처리재와 기존의 견출공법에 사용되는 시멘트에 혼화제를 첨가한 플라스터를 사용하여 KS F 4716에 규정하고 있는 시험방법에 의하여 실험을 실시하여 콘크리트 면처리재와 플라스터의 성능비교 및 KS에서 제시하고 있는 성능기준의 만족여부를 고찰하여 그 활용가능성을 검토하였다. 그 결과 다음과 같은 결과를 얻었다. 콘크리트 면처리재는 초기 건조수축에 의한 잔갈림과 균열의 발생이 없어, 기존 견출공사에 비해 우수한 것으로 나타났다. 콘크리트 면처리재는 기존 시멘트 페이스트를 사용한 경우보다 1.6배 높은 부착강도를 나타냈다. 콘크리트 면처리재는 표면의 평활도 및 마무리 정도가 기존 견출공사에 비해 우수하였으며 콘크리트 바탕바름제의 규정 모두를 만족하는 것으로 나타났다. 이와 같이 콘크리트 면처리재는 기존의 견출공사에서 사용되는 혼화제를 혼입한 시멘트 페이스트보다 재료적 특성면에서 우수한 재료로 판단된다.