열연판을 사용한 방향성 박규소강대의 제작

The Trial Manufacture of the Grain-Oriented Ultra-Thin Silicon Steel Ribbon using Hot-Rolled Plate

  • 강희우 (주성대학 전자재료응용학과)
  • 발행 : 2001.02.01

초록

열연판을 모재로 하여 압연 및 열처리 공정을 조합한 공정을 3회 냉간압연법을 사용하여 최종두께 100$\mu\textrm{m}$로 제작한 방향성 규소강대에 대하여, 직류자기 특성 및 결정입자의 열처리 의존성, 결정방위 등을 조사하였다. 그 결과, (110)면이 거의 시료 전체표면에 성장하는 것이 관측되었으며, B$_{8}$은 1.9 T정도, 평균$\alpha$각은 약 4.6$^{\circ}$이었다. 향후 약간의 (001)조직의 집적도 개선이 추가된다면, 염가의 열연판을 모재로 사용하여 기존의 방향성 규소강판의 경우보다 훨씬 제조공정수를 단순화함으로써, 경제성이 우수한 방향성 극박 규소강대를 제작할 수 있는 가능성을 확인하였다.

We investigated to DC magnetic characteristics, the dependence of annealing temperature on the crystal grain and the crystalline orientation for grain-oriented silicon ribbon with 100 $\mu\textrm{m}$ final thickness manufactured by three times cold rolling method using the hot-rolled silicon steel plate as a raw material. The growth of (110)[001] Goss texture were almost observed in the whole area of the sample. The values of the saturation magnetic flux density B$\sub$s/ and the average ${\alpha}$ angle have 1.9 T and 4.6 degrees respectively. From this result we could be confirmed that the three times cold rolling method has a possibility of manufacture for oriented ultra-thin silicon ribbons much more simple and cheeper than the existing oriented silicon steel manufacturing method by means of more simplified producing process.

키워드

참고문헌

  1. 한국전력설비 고장통계 자료 한국전력공사
  2. J. Appl. Phys. v.64 no.5352 K. I. Arai;K. Ishyama
  3. IEEE Trans. Magn v.MAG-25 no.3439 K.I. Arai;K. Ishiyama;H.Mogi
  4. 日本 應用磁氣學會 學術講演槪要集, 18회 荒井賢一;中野正基;石山化志;我妻成人;姜熙雨
  5. 日本 應用磁氣學會誌 v.19 no.433 荒井賢一;中野正基;石山化志;我妻成人;姜熙雨
  6. IEEE Trans. Magn. v.MAG-26 no.1969 K.I. Arai;H. Satoh;S. Agatsuma;K. Ishiyama
  7. 철と鋼 井口征夫
  8. 철と鋼 和田敏哉;黑木克郞;岩山健三
  9. 日本特許公報昭 51-13469號 今中一拓;菅孝宏;小田良夫;佐藤微
  10. Structure of Metals(3rd-ed.) C.S. Barrett;T.B. Massalski
  11. 銑と鋼 v.15 和田敏哉;黑木克郞;岩山健三