한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제15권2호
  • /
  • Pages.88-93
  • /
  • 2001
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지

원자력 발전소용 이종재(Cu 합금/STS316L) 마찰용접의 최적화와 AE에 의한 실시간 평가에 관한 연구

Study on Optimization of Dissimilar friction Welding of Nuclear Power Plant Materials (Cu Alloy/STS316L) and Its Real Time AE Evaluation

  • 발행 : 2001.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, joints of Cu-1Cr-0.1Zr alloy to STS316L were performed by friction welding method. Particularly, Cu-1Cr-0.1Zr alloy is attractive candidate as nuclear power plant material and exibit the best combination of high strength and good electrical and thermal conductivity of any copper alloy examined. The stainless steel is a structural material while copper alloy acts as a heat sink material for the surface heat flux in the first wall. So, in this paper, not only the development of optimizing of friction welding with more reliability and more applicability but also the development of in-process real-time weld quality (such as strength and toughness) evaluation technique by acoustic emission for friction welding of such nuclear reactor component of Cu-1Cr-0.1Zr alloy to STS316L steel sere performed.

키워드

참고문헌

  1. 한국해양공학회지 v.13 no.2 로켓모터용 노즐재의 관대관 마찰용접과 AE평가에 관한 연구 공유식;오세규;이배섭
  2. 한국해양공학회지 v.13 no.2 자동차 크랭크축용 강종의 봉대봉 동종재 마찰용접의 피로강도 특성 및 AE평가 양형태;오세규;김헌경
  3. 한국비파괴 검사학회지 v.15 no.4 Cr-Mo강의 마찰용접 최적화와 음향방출법에 의한 실시간 비파괴적 평가 오세규;장홍근;장지훈
  4. 한국해양공학회 추계학술강연논문집 로켓모터용 노즐의 동종재 마찰용접의 최적화와 고온 크리프 예측 및 AE평가(2)-고온 크리프 예측 및 AE평가 오세규;장홍근;이향동;신국식;정문식;송윤섭
  5. 摩擦壓接 摩擦壓接硏究會
  6. 摩擦壓接協會20年誌 日本摩擦壓接協會
  7. Welding Handbook-Vol.1, Fundamentals of Welding(7th edition) v.1 AWS
  8. Journal of Nuclear Materials v.135 Butterworth, G. J.
  9. Journal of Nuclear Materials v.189 Butterworth G. J.;C. B. A. Forty
  10. Journal of Nuclear Materials v.141-143 Grant, N. J.;O. K. Harling;G. Kohse;J. Megusar;T. Lee
  11. Proc. Int. Offshore and Polar Eng. Conf., ISOPE Development of Real Time Quality Evaluation of Friction Welding by Acoustic Emission ; 2nd Report - Effects of Welding Parameters n Weld Strength and AE Oh, S. K.;H. K. Chang;J. W. Oh
  12. Proc. The 7th Int. Offshore and Polar Eng. Conf., ISOPE v.4-S37 Development of Real-Time Quality Evaluation of Friction Welding by Acoustic Emission ; 3rd Report. Effects of Initial AE Counts during Plastic Deformation in FRW Oh, Sae Kyoo;Hong-Keun Chang;Hyung-Dong Park;Bae-Sub Lee
  13. Proc. The 7th Int. Offshore and Polar Eng. Conf. v.4-S37 Development of Real-Time Quality Evaluation of Friction Welding by Acoustic Emission : 3nd Report - Effects of Initial AE Counts during Plastic Deformation in FRW Oh, Sae-Kyoo;Hong-Keun Chang;Hyung-Dong Park;Bae-Sub Lee