Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

A Study about Flow Characteristics of Impinging Jet for Thermal Control (I)

전열제어를 위한 충돌제트의 유동특성에 관한 연구(I)

  • 김동균 (동아대학교 대학원 기계공학과, 한국해양대학교 조선, 해양기자재 Center) ;
  • 김정환 (한국해양대학교 대학원 기계공학과) ;
  • 배석태 (동명대학 기계과) ;
  • 김시범 (동아대학교 기계공학과) ;
  • 이영호 (한국해양대학교 기계. 정보공학부)
  • Published : 2001.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

A present study is the flow characteristics of impinging jet by PIV measurement and numerical analysis. The flow characteristics of impinging jet flow are affected greatly by nozz1e inlet velocity An circular sharp edged nozzle type($45^{\circ}$ ) was used to achieve uniform mean velocity at the nozz1e inlet, and its diameter is 10 mm(d). Therefore, the flow characteristics on the impinging jet can be changed largely by the control of main flow In this parent study, we investigate the effects of inlet velocity, its variable is nozzle inlet Reynolds numbers (Re=1500, 3000, 4500, 6000 and 7500)

Keywords

References

  1. Int. J. Heat Mass Transfer v.8 The Role of Turbulence in Determining the Heat Transfer Characteristics of Impinging Jets Gardon, R;Akrifat, J. C.
  2. Advances in Heat Transfer v.13 Heat and Mass Transfer Between Impinging Gas Jets and Solid Surface Martin, H.
  3. 대한기계학회 춘계학술대회 눈문집 v.2 PIV에서의 계조치 상호상관법 개발 이영호; 최장운
  4. 대한기계학회지 v.36 no.12 PIV의 분류 및 원리 이영호
  5. Int. J. Heat Mass Transfer v.37 no.12 Air Jets Implingement Heat Transfer at Low Nozzle-Plate Spacing Lytle, D.;Webb, B. W.
  6. ASME J. Heat Transfer v.119 Impingement Cooling Flow and Heat Transfer Under Acoustic Excitation C. Gau;W. Y. Shey;C. H. Shen