References
- S. Prochazka and R. M. Scanlan, 'Effect of Boron and Carbon on Sintering SiC' J. Am Ceram: Soc., Vol. 58, NO. 1-2, pp 72, 1975 https://doi.org/10.1111/j.1151-2916.1975.tb18990.x
- F. F. Lange and T. K. gupta, 'Sintering of SiC with Boron Compounds' Journal of The American Ceramic Society- Discussions and Notes, Vol. 59, NO. 11-12, 537-538, 1976
- Yukio Takeda, Kousuke Nakamura, Kunihiro Maeda and Yasuo Matsushita, 'Effects of Elemental Additives on Electrical Resistivity of Silicon Carbide Ceramics' J. Am Ceram: Soc., Vol. 70, NO. 10, c-266-c-267, 1987 https://doi.org/10.1111/j.1151-2916.1987.tb04895.x
- Do-Hyeong Kim and Chong Hee Kim, 'Toughening Behavior of Silicon Carbide with Additions of Yttria and Alumina' J. Am Ceram: Soc., Vol. 73, NO.5, 1431-34, 1990 https://doi.org/10.1111/j.1151-2916.1990.tb05219.x
- Suresh Baskaran and John W. Halloran, 'Fibrous Monolithic Ceramics: II, Flexural Strength and Fracture Behavior of the Silicon Carbide/Graphite System' J. Am Ceram: Soc., Vol. 76, NO.9, pp. 2217-2224, 1993 https://doi.org/10.1111/j.1151-2916.1993.tb07757.x
-
Seung-Hyunk Yim, Yong-Deok Shin and Joon-Tae Song, 'The Properties of
$\beta-SiC-TiB_2$ Electroconductive Ceramic Composites Densified by Liquid-Phase Sintering' Trans. KIEE. Vol. 49 NO.9, pp. 510-515, 2000 - Mamoru Mitomo 'Microstructural Development During Gas-Pressure Sintering of a -Silicon Nitride' J. Am. Ceram. Soc., Vol. 75, NO.1, pp.103-108, 1992 https://doi.org/10.1111/j.1151-2916.1992.tb05449.x
- Nitin P. Padture 'In Situ-Toughened Silicon Carbide' J Am. Ceram. Soc., Vol. 77, NO.2, pp. 519-23, 1994 https://doi.org/10.1111/j.1151-2916.1994.tb07024.x
- Mamoru Mitomo, Young-Week Kim, Hideki Hirotsuru 'Fabrication of Silicon carbide nanocerarnics' J Mater. Res., Vol. 11, No.7, Jul, 1996
- A. G. Evans and T. R. Wilshaw, 'Quasi-Static Solid Particle Demage in Brittle Solids -I. Observation Analysis and Implication' Acta Metallurgica. Vol. 24, pp. 939-956, 1976 https://doi.org/10.1016/0001-6160(76)90042-0
- M. Ramulu and M. Taya, 'EDM machinability of SiCw/Al Composites' Journal of Materials Science. Vol. 24, pp. 1103-1108, 1989 https://doi.org/10.1007/BF01148805
- 'Philips Research Reports' Philips Res. Repts 13, 1-9, 1958
- William D. Callister, 'Materials Science and Engineering an Introduction' Fourth Edition, pp. 513, John Wiley & Sons, Inc. 1996.
- Patricia A. Hoffman, 'Thermo Elastic Properties of Silicon Cabide-Titanium Diboride Particulate Composite' M. S Thesis, Department of Materials Science and Engineering, The Pennsylvania State University, 1992
- Jurgen Redel, 'Interaction Between Crack Deflection and Crack Bridging' Journal of the European Ceramic Society, 10, pp. 143-150, 1992 https://doi.org/10.1016/0955-2219(92)90027-B
-
Yong-Deok Shin, Jin-Young Ju, Mi-Lim Park, Byung-Moon So, Seung-Hyuk Lim and Joon-Tae Song, 'Manufacture of
${\beta}-SiC-TiB_2$ Composites Densified by Liquid-Phase Sintering' KIEE Annual autum conference, Vol. C, pp. 479-481, 2000 - Tor Grande, Hakson Sommerset, Eirik Hagen, Kjell wiik and Mari-Ann Einarsrud, 'Effect of Weight Loss on Liquid-Phase-Sintered Silicon Carbide' J. Am Ceram Soc., Vol. 80, NO.4, pp. 1047-1052, 1997 https://doi.org/10.1111/j.1151-2916.1997.tb02945.x