Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of the Peening Intensity by Shot Peening

쇼트피닝 가공조건이 피닝강도에 미치는 영향

  • Published : 2001.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The shot peening process is most often used to improve fatigue properties of metal parts. The single most critical parameter of the shot peening process is the shot ball itself. Without the correct quality media, all other shut peening parameters are extraneous and the desired fatigue improvement and consistency of improvement will not be achieved. Shot peening involves modifications of the surface and subsurface condition of a material that can be described by the change of the residual stresses, the hardness, and the surface roughness. This Paper Presents the shot peening to optimize the shot ball parameters. The effect of shot peening parameter on the surface roughness, surface hardness and residual stress are investigated.

Keywords

References

  1. Aoki, H., Nagashima, E., and Miura, T., 1990, 'Effect of Shot Peening Conditions on Fatigue Strength of Carburized Steel,' Proc. of the 4th International Conference on Shot Peening, Tokyo, pp. 513-518
  2. 이승호, 김희송, 1999, '스프링강의 피로거동에 미치는 2단 쇼트피닝의 효과,' 대한기계학회논문집 A권, 제23권, 제1호, pp. 140-147
  3. Verport, C. M., and Gerdes, C., 1989, 'Influence of Shot Peening on Material Properties of Turbine Blades,' Shot Peening Theory and Application, Institute for Industrial Technology Transfer International, France, pp. 11-70
  4. Ebenau, A., Lohe, D., Vohringer, O., and Macherauch, E., 1990, 'Influence Shot Peening on the Microstructure and the Bending Fatigue Strength of Baintic-Austenitic Nodular Cast Iron,' Proc. of the 4th International Conference on Shot Peening, Tokyo, pp. 389-398
  5. Wohlfahrt, H., 1984, 'The Influence of Peening Conditions on the Resulting Distribution of Residual Stress,' Proc. of the 2nd International Conference on Shot Peeing, Chicago, pp. 316-331
  6. Al-Obiad, Y. F., 1990, 'A Rudimentary Analysis of Improving Fatigue Life of Metal by Shot Peening,' J. of Applied Mechanics, Vol. 57, pp. 307-312
  7. Al-Hassani, S.T.S., 1990, 'Mechanical Aspects of Residual Stress Development in Shot Peening,' Proc. of the 4th International Conference on Shot Peening, Tokyo, pp. 583-602
  8. Gillespie, R. D., 1993, 'Its Effect on Process Consistency and Resultant Improvement in Fatigue Characteristics,' Proc. of the 5th International Conference on Shot Peening, Oxford, pp. 81-90