Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Basic Study on the Evaluation of Flat End-mill Coated TiAlN

TiAlN코팅 평 엔드밀의 성능평가에 관한 기초 연구

  • 유중학 (한국기술교육대학교 메카트로닉스 공학부) ;
  • 국정한 (한국기술교육대학교 기계공학부) ;
  • 김문기 (한국기술교육대학교 메카트로닉스 공학부)
  • Published : 2001.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is an evaluation of flat end mills to develop appropriate tools for the high speed machining. First of all, several flat end mills which are produced by different makers are selected to analyze the performances of the tools. Experimental works are also executed to measure cutting farce, tool wear and surface roughness for different cutting conditions. And then the results are compared and analyzed for developing optimal cutting tool in the high speed condition.

Keywords

References

  1. 2nd Int. Conference on High Speed Machining High Speed Machining of Hardened Steels using Coated Tungsten Carbide Ball Nose End Mills R. C. Dewes(et al.)
  2. TOOL & TECH no.2 Trochoid Cutting and Helical Cutting for High Speed Machining Y. Okazaki
  3. 선진전문가 초청 특별세미나 자료 고속가공기술 및 고속가공용 절삭공구의 설계 및 평가요소 P. Collin
  4. 한국정밀공학회 추계학술대회 논문집 볼엔드밀을 이용한 난삭재의 고속가공 특성 손창수;강명창;김정석;이득우;황경현;김종관
  5. 한국공작기계학회지 v.9 no.6 난삭성 재료의 가공환경변화에 따른 고속가공 특성 평가 김석원;안철수;이득우
  6. TOOL & TECH no.2 Dry Cutting Performance of (Al,Ti)N Coated Carbide Endmills for High Speed Machining S. Kitaura(et al.)
  7. Int. J. of Machine Tools Manufacture v.30 no.1 Wear Measurement of Cutting Tools by Computer Vision K. B. Pedersen
  8. Int. J. of Machine Tool and Manufacture v.29 no.3 On the Correlation Dynamic Cutting Force and Tool Wear L. C. Lee;K. S. Lee;C. S. Gan
  9. KISTLER Seminar spectrum In-process measurement of cutting force and its application to identification of machining status Y. Ito
  10. Transaction of the ASME, J. of Engineering for Industry v.109 Acoustic Emission Sensing of Tool Wear in Face Milling E. N. Dici;D. A. Dornfeld