Abstract
This study developed a manipulator for robotic harvester to harvest cucumber. The manipulator was designed and built fur transferring an end-effecter from a fixed point to a specified cucumber. Its development involved the integration of a manipulating system with a PC compatible, DC motors, geared boxes, timing belts, and a motor controller board. Software, written in Quick basic. combined the functions of motor control with various circumstances. In order to move smoothly and rapidly the manipulator, it's shoulder link and elbow link were minimized by using rotational inertial moment without a motor and a geared box. After 30 replications of exercising the manipulator, it was concluded that the precision values of the X, Y and Z axes were less than 0.5mm, 7.25mm and 0.35mm, respectively. The precision data indicated the manipulator was not missing any steps fur the harvester to reach a target cucumber.